Messages in this thread Patch in this message | | | From | Grzegorz Andrejczuk <> | Subject | [PATCH v1 2/4] Add enabling of the R3 MWAIT during boot for KNL | Date | Wed, 12 Oct 2016 12:13:08 +0200 |
| |
If processor is Intel Xeon Phi we enable user-level mwait feature. Enabling this feature suppreses invalid-opcode error, when MONITOR/MWAIT is called from ring 3.
Change-Id: I1c7defb99296b022790a068a6c725b3e860cd68c Signed-off-by: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com> --- arch/x86/kernel/cpu/intel.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index fcd484d..7f0f01a 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -61,6 +61,14 @@ void check_mpx_erratum(struct cpuinfo_x86 *c) } } +static int phir3mwait = 1; +static int __init phir3mwait_disable(char *value) +{ + phir3mwait = 0; + return 1; +} +__setup("intel-phir3mwait=disable", phir3mwait_disable); + static void early_init_intel(struct cpuinfo_x86 *c) { u64 misc_enable; @@ -211,6 +219,24 @@ static void early_init_intel(struct cpuinfo_x86 *c) } check_mpx_erratum(c); + + /* + * Setting ring 3 MONITOR/MWAIT for all threads + * when CPU is Xeon Phi Family x200 + * This can be disabled with phir3mwait=disable cmdline switch. + * We preserve the reserved values and set only 2nd bit. + * Ref: + * https://software.intel.com/en-us/blogs/2016/10/06/intel-xeon-phi-product-family-x200-knl-user-mode-ring-3-monitor-and-mwait + */ + if (c->x86 == 6 && + c->x86_model == INTEL_FAM6_XEON_PHI_KNL && + phir3mwait) { + u64 prev; + + rdmsrl(MSR_PHI_MISC_THD_FEATURE_ENABLE, prev); + wrmsrl(MSR_PHI_MISC_THD_FEATURE_ENABLE, + prev | MSR_PHI_MISC_THD_FEATURE_ENABLE_R3MWAIT); + } } #ifdef CONFIG_X86_32 -- 2.5.1
| |