lkml.org 
[lkml]   [2016]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [Intel-gfx] [PATCH v2] drm/i915: intel_hpd_init(): Fix suspend/resume reprobing
On Tue, Jan 05, 2016 at 04:15:30PM -0500, Lyude wrote:
> This fixes reprobing of display connectors on resume. After some talking
> with danvet on IRC, I learned that calling drm_helper_hpd_irq_event() does
> actually trigger a full reprobe of each connector's status. It turns out
> this is the actual reason reprobing on resume hasn't been working (this was
> observed on a T440s):
>
> - We call hpd_init()
> - We check each connector for a couple of things before marking
> connector->polled with DRM_CONNECTOR_POLL_HPD, one of which is an
> active encoder. Of course, a disconnected port won't have an
> active encoder, so we don't add the flag to any of the
> connectors.
> - We call drm_helper_hpd_irq_event()
> - drm_helper_irq_event() checks each connector for the
> DRM_CONNECTOR_POLL_HPD flag. The only one that has it is eDP-1,
> so we skip reprobing each connector except for that one.
>
> In addition, we now avoid setting connector->polled to
> DRM_CONNECTOR_POLL_HPD for MST connectors, since their reprobing is handled
> by the mst helpers. This is probably what was originally intended to happen
> here anyway.
>
> Fixes: 0e32b39ceed6 ("drm/i915: add DP 1.2 MST support (v0.7)")
> Cc: stable@vger.kernel.org
> Signed-off-by: Lyude <cpaul@redhat.com>
> ---
> Changes
> * Use the explanation of the issue as the commit message instead
> * Change the title of the commit, since this does more then just stop a check
> for an encoder now
> * Add "Fixes" line for the patch that introduced this regression
> * Don't enable DRM_CONNECTOR_POLL_HPD for mst connectors

For drm/i915 I prefer when the patch changelog is above the s-o-b section,
with v2: v3: ... headings.
>
> drivers/gpu/drm/i915/intel_hotplug.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_hotplug.c b/drivers/gpu/drm/i915/intel_hotplug.c
> index b177857..51ecf0b4 100644
> --- a/drivers/gpu/drm/i915/intel_hotplug.c
> +++ b/drivers/gpu/drm/i915/intel_hotplug.c
> @@ -468,9 +468,9 @@ void intel_hpd_init(struct drm_i915_private *dev_priv)
> list_for_each_entry(connector, &mode_config->connector_list, head) {
> struct intel_connector *intel_connector = to_intel_connector(connector);
> connector->polled = intel_connector->polled;
> - if (connector->encoder && !connector->polled && I915_HAS_HOTPLUG(dev) && intel_connector->encoder->hpd_pin > HPD_NONE)
> - connector->polled = DRM_CONNECTOR_POLL_HPD;
> - if (intel_connector->mst_port)
> + if (!connector->polled && !intel_connector->mst_port &&
> + I915_HAS_HOTPLUG(dev) &&
> + intel_connector->encoder->hpd_pin > HPD_NONE)
> connector->polled = DRM_CONNECTOR_POLL_HPD;

Hm, on 2nd thought we could clarify this further like this:

list_for_each_entry(...) {
...

/* MST has a dynamic intel_connector->encoder and it's
* reprobing is all handled by the MST helpers. */
if (intel_connector->mst_port)
continue;

if (!connector->polled && I915_HAS_HOTPLUG(dev) &&
intel_connector->encoder->hpd_pin > HPD_NONE)
connector->polled = DRM_CONNECTOR_POLL_HPD;

}

That yields even tidier code and gives us a place for a comment. Can you
pls respin once more?

Thanks, Daniel

> }
>
> --
> 2.5.0
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch


\
 
 \ /
  Last update: 2016-01-06 09:01    [W:0.073 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site