lkml.org 
[lkml]   [2015]   [Sep]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] dmaengine: omap-dma: Add support for memcpy
From
Date
Laurent,

On 09/08/2015 02:24 PM, Laurent Pinchart wrote:
> Hi Peter,
>
> Thank you for the patch.
>
> While trying to port the omap_vout driver to the DMA engine API I noticed that
> the driver makes use of double-indexed transfers, which are not supported by
> the omap-dma driver. I haven't checked in details what would be required, but
> the interleaved API might be a good candidate for this. Do you have any plan
> to add support for double-indexed transfers to the omap-dma driver ?

If double-indexed transfer support is needed by drivers still using the
legacy/direct sDMA API, then I don't think we have other options..
So far I have not looked at that part and where it would fit.
I'll try to find time to look at this. I hope not in the distant future ;)

> On Wednesday 22 April 2015 10:34:29 Peter Ujfalusi wrote:
>> The sDMA controller is capable of performing memory copy operation. It need
>> to be configured to software triggered mode and without HW synchronization.
>> The sDMA can copy data which is aligned to 8, 16 or 32 bits.
>>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> ---
>> drivers/dma/omap-dma.c | 51 +++++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 49 insertions(+), 2 deletions(-)
>

--
Péter


\
 
 \ /
  Last update: 2015-09-08 15:01    [W:0.052 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site