lkml.org 
[lkml]   [2015]   [Sep]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 0/5] Let the power allocator thermal governor run on any thermal zone
Hi Javi,

On Mon, Sep 7, 2015 at 9:19 PM, Javi Merino <javi.merino@arm.com> wrote:
> Relax the thermal governor requirements of sustainable_power and at
> least two trip points so that it can be bound to any thermal zone.
> Its behavior won't be optimal, it would be the best possible with the
> data provided.

I tested this whole series on my MT8173 board with a battery thermal
zone with no trip points, so, for this whole series (not sure if both
are needed, so take your pick):

Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Tested-by: Daniel Kurtz <djkurtz@chromium.org>

I am a bit confused by MAINTAINERS for drivers/thermal.
Will these patches be picked up by Eduardo or Zhang?

Thanks!
-Dan

> Changes since v4:
> - Fix crash when a thermal zone with no trip points has no
> get_trip_point_temp(). Reported by Daniel Kurtz.
> - s/estimate_controller_constants()/estimate_pid_constants()/g
>
> Changes since v3:
> - Don't hardcode a value for sustainable power and re-estimate
> the PID controllers every time if no sustainable power is given
> as suggested by Eduardo Valentin.
> - power_actor_get_min_power() moved to a patch of its own.
>
> Changes since v2:
> - Typos suggested by Daniel Kurtz
>
> Changes since v1:
> - Let the power allocator governor operate if the thermal zone
> doesn't have tzp as suggested by Chung-yih Wang
>
> Javi Merino (5):
> thermal: Add a function to get the minimum power
> thermal: power_allocator: relax the requirement of a sustainable_power
> in tzp
> thermal: power_allocator: relax the requirement of two passive trip
> points
> thermal: power_allocator: don't require tzp to be present for the
> thermal zone
> thermal: power_allocator: exit early if there are no cooling devices
>
> Documentation/thermal/power_allocator.txt | 2 +-
> drivers/thermal/power_allocator.c | 243 ++++++++++++++++++++++--------
> drivers/thermal/thermal_core.c | 28 ++++
> include/linux/thermal.h | 6 +
> 4 files changed, 214 insertions(+), 65 deletions(-)
>
> --
> 1.9.1
>


\
 
 \ /
  Last update: 2015-09-08 04:01    [W:0.181 / U:0.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site