lkml.org 
[lkml]   [2015]   [Sep]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 1/3][v4] Documentation: dt: dwc3: Add snps,quirk-frame-length-adjustment property
    Date
    Add snps,quirk-frame-length-adjustment property which provides value
    for post silicon frame length adjustment

    Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
    ---
    Changes for v4: None

    Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++
    1 file changed, 3 insertions(+)

    diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
    index 0815eac..8c7d585 100644
    --- a/Documentation/devicetree/bindings/usb/dwc3.txt
    +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
    @@ -40,6 +40,9 @@ Optional properties:
    - snps,hird-threshold: HIRD threshold
    - snps,hsphy_interface: High-Speed PHY interface selection between "utmi" for
    UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
    + - snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ
    + register for post-silicon frame length adjustment when the
    + fladj_30mhz_sdbnd signal is invalid or incorrect.

    This is usually a subnode to DWC3 glue to which it is connected.

    --
    2.1.0


    \
     
     \ /
      Last update: 2015-09-04 06:41    [W:4.881 / U:2.172 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site