lkml.org 
[lkml]   [2015]   [Sep]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mtd: nand: denali: max_banks calculation changed in revision 5.1
On Tue, Sep 29, 2015 at 10:01:10AM -0500, Graham Moore wrote:
> Howdy folks,
>
> Any comment on this patch?

A tiny comment below.

> Is anyone else using Denali NAND rev 5.1
> controller?

I have no devices to test, but CC'ing Enrico, who sent a denali patch
recently.

In general, MTD has a lot of drivers for various hardware, and I have
few of them to test. If anyone is interested in getting CC's (so they
can test, review, and otherwise help expedite the process), I'd be happy
to ack an addition to MAINTAINERS, perhaps as 'R:' (reviewer)...

> Thanks,
> Graham
>
> On 07/21/2015 09:39 AM, Graham Moore wrote:
> >Read Denali hardware revision number and use it to
> >calculate max_banks, The encoding of max_banks changed
> >in Denali revision 5.1.
> >
> >Signed-off-by: Graham Moore <grmoore@opensource.altera.com>
> >---
> > drivers/mtd/nand/denali.c | 11 ++++++++++-
> > drivers/mtd/nand/denali.h | 2 ++
> > 2 files changed, 12 insertions(+), 1 deletion(-)
> >
> >diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
> >index 870c7fc..a98b41e 100644
> >--- a/drivers/mtd/nand/denali.c
> >+++ b/drivers/mtd/nand/denali.c
> >@@ -458,8 +458,17 @@ static void find_valid_banks(struct denali_nand_info *denali)
> > static void detect_max_banks(struct denali_nand_info *denali)
> > {
> > uint32_t features = ioread32(denali->flash_reg + FEATURES);
> >+ /*
> >+ * Read the revision register, so we can calculate the max_banks
> >+ * properly: the encoding changed from rev 5.0 to 5.1
> >+ */
> >+ u32 revision = MAKE_COMPARABLE_REVISION(
> >+ ioread32(denali->flash_reg + REVISION));
> >
> >- denali->max_banks = 2 << (features & FEATURES__N_BANKS);
> >+ if (revision < REVISION_5_1)
> >+ denali->max_banks = 2 << (features & FEATURES__N_BANKS);
> >+ else
> >+ denali->max_banks = 1 << (features & FEATURES__N_BANKS);
> > }
> >
> > static void detect_partition_feature(struct denali_nand_info *denali)
> >diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
> >index 145bf88..4bf13bb 100644
> >--- a/drivers/mtd/nand/denali.h
> >+++ b/drivers/mtd/nand/denali.h
> >@@ -178,6 +178,8 @@
> >
> > #define REVISION 0x370
> > #define REVISION__VALUE 0xffff
> >+#define MAKE_COMPARABLE_REVISION(x) swab16(x & REVISION__VALUE)

It's probably best to add parentheses around the 'x'.

> >+#define REVISION_5_1 0x00000501
> >
> > #define ONFI_DEVICE_FEATURES 0x380
> > #define ONFI_DEVICE_FEATURES__VALUE 0x003f
> >
>

I can fix that up and apply, if no objections.

Brian


\
 
 \ /
  Last update: 2015-09-29 20:41    [W:0.044 / U:1.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site