lkml.org 
[lkml]   [2015]   [Sep]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] extcon: arizona: Add support for WM8998 and WM1814
Date
This patch adds support for the WM8998 and WM1814 codecs.
These use the same IP version as WM5110 but have different
clamp control.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
---
drivers/extcon/extcon-arizona.c | 31 +++++++++++++++++++++----------
1 file changed, 21 insertions(+), 10 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 4479781..b010307 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1,7 +1,7 @@
/*
* extcon-arizona.c - Extcon driver Wolfson Arizona devices
*
- * Copyright (C) 2012 Wolfson Microelectronics plc
+ * Copyright (C) 2012-2014 Wolfson Microelectronics plc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -154,6 +154,10 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
int ret;

switch (arizona->type) {
+ case WM8998:
+ case WM1814:
+ mask = 0;
+ break;
case WM5110:
case WM8280:
mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR |
@@ -197,17 +201,19 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
ret);
}

- ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L,
- mask, val);
- if (ret != 0)
- dev_warn(arizona->dev, "Failed to do clamp: %d\n",
+ if (mask) {
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1L,
+ mask, val);
+ if (ret != 0)
+ dev_warn(arizona->dev, "Failed to do clamp: %d\n",
ret);

- ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R,
- mask, val);
- if (ret != 0)
- dev_warn(arizona->dev, "Failed to do clamp: %d\n",
- ret);
+ ret = regmap_update_bits(arizona->regmap, ARIZONA_HP_CTRL_1R,
+ mask, val);
+ if (ret != 0)
+ dev_warn(arizona->dev, "Failed to do clamp: %d\n",
+ ret);
+ }

/* Restore the desired state while not doing the clamp */
if (!clamp) {
@@ -1289,6 +1295,11 @@ static int arizona_extcon_probe(struct platform_device *pdev)
break;
}
break;
+ case WM8998:
+ case WM1814:
+ info->micd_clamp = true;
+ info->hpdet_ip_version = 2;
+ break;
default:
break;
}
--
1.9.1


\
 
 \ /
  Last update: 2015-09-28 14:01    [W:0.081 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site