lkml.org 
[lkml]   [2015]   [Sep]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v6 4/9] Input: goodix - write configuration data to device
Date


> -----Original Message-----
> From: Bastien Nocera [mailto:hadess@hadess.net]
> Sent: 25 September, 2015 17:41
> To: Tirdea, Irina; Dmitry Torokhov; Aleksei Mamlin; linux-input@vger.kernel.org
> Cc: Mark Rutland; Purdila, Octavian; linux-kernel@vger.kernel.org; devicetree@vger.kernel.org
> Subject: Re: [PATCH v6 4/9] Input: goodix - write configuration data to device
>
> On Tue, 2015-09-15 at 17:31 +0300, Irina Tirdea wrote:
> > Goodix devices can be configured by writing custom data to the device
> > at
> > init. The configuration data is read with request_firmware from
> > "goodix_<id>_cfg.bin", where <id> is the product id read from the
> > device
> > (e.g.: goodix_911_cfg.bin for Goodix GT911, goodix_9271_cfg.bin for
> > GT9271).
> >
> > The configuration information has a specific format described in the
> > Goodix
> > datasheet. It includes X/Y resolution, maximum supported touch
> > points,
> > interrupt flags, various sesitivity factors and settings for advanced
>
> sensitivity.

Will fix this in next version of the patches. I will wait for you reply on
the gpio issue before sending a new version.

Thanks,
Irina

\
 
 \ /
  Last update: 2015-09-25 23:41    [W:2.552 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site