lkml.org 
[lkml]   [2015]   [Sep]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/2] PCI: Add support for PCI Enhanced Allocation "BARs"
On Wed, Sep 23, 2015 at 04:26:56PM -0700, Yinghai Lu wrote:
> On Wed, Sep 23, 2015 at 3:27 PM, Sean O. Stalley <sean.stalley@intel.com> wrote:
> > PCI Enhanced Allocation is a new method of allocating MMIO & IO
> > resources for PCI devices & bridges. It can be used instead
> > of the traditional PCI method of using BARs.
> >
> > EA entries are hardware-initialized to a fixed address.
> > Unlike BARs, regions described by EA are cannot be moved.
> > Because of this, only devices which are permanently connected to
> > the PCI bus can use EA. A removable PCI card must not use EA.
>
> As it is fixed, can you put IORESOURCE_PCI_FIXED in the res->flags?
>
> Thanks
>
> Yinghai

IORESOURCE_PCI_FIXED is set in pci_ea_set_flags():

+static unsigned long pci_ea_set_flags(struct pci_dev *dev, u8 prop)
+{
+ unsigned long flags = IORESOURCE_PCI_FIXED;
+
+

Which is called in pci_ea_read(), and passed to res->flags (if there aren't any errors):

+
+ /* Try to use primary properties, otherwise fall back to secondary */
+ flags = pci_ea_set_flags(dev, PCI_EA_PP(dw0));
+ if (!flags)
+ flags = pci_ea_set_flags(dev, PCI_EA_SP(dw0));
+

...

+ res->flags = flags;


-Sean


\
 
 \ /
  Last update: 2015-09-24 02:21    [W:0.113 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site