lkml.org 
[lkml]   [2015]   [Sep]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] Documentation: DT bindings: rockchip-i2s: add capture and lrck-mode
Date
rockchip,capture-channels: max capture channels, 2 channels default.
rockchip,lrck-mode: 0: rxtx separate, 1: tx share, 2: rx share.
default use 'rxtx separate' mode.

Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
---
Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
index 9b82c20..4066b85 100644
--- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
+++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt
@@ -21,6 +21,9 @@ Required properties:
- clock-names: should contain followings:
- "i2s_hclk": clock for I2S BUS
- "i2s_clk" : clock for I2S controller
+- rockchip,capture-channels: max capture channels, if not set, 2 channels default.
+- rockchip,lrck-mode: select lrck use mode: 0: rxtx separate, 1: tx share, 2: rx share.
+ default use 'rxtx seprate' mode.

Example for rk3288 I2S controller:

@@ -34,4 +37,6 @@ i2s@ff890000 {
dma-names = "tx", "rx";
clock-names = "i2s_hclk", "i2s_clk";
clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ rockchip,capture-channels = <2>;
+ rockchip,lrck-mode = <0>;
};
--
2.3.6



\
 
 \ /
  Last update: 2015-09-23 06:01    [W:0.088 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site