lkml.org 
[lkml]   [2015]   [Sep]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/2] dt-bindings: Add Broadcom Cygnus PCIe PHY binding
Hi,

On Tuesday 15 September 2015 11:26 PM, Ray Jui wrote:
> Add DT binding for Broadcom Cygnus PCIe PHYs

DT binding documentation.

-Kishon

>
> Signed-off-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Arun Parameswaran <aparames@broadcom.com>
> Reviewed-by: JD (Jiandong) Zheng <jdzheng@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>


> ---
> .../bindings/phy/brcm,cygnus-pcie-phy.txt | 30 ++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
> new file mode 100644
> index 0000000..ba41143
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt
> @@ -0,0 +1,30 @@
> +Broadcom Cygnus PCIe PHY
> +
> +Required properties:
> +- compatible: Must be "brcm,cygnus-pcie-phy"
> +- reg: base address and length of the PCIe PHY block
> +- #phy-cells: must be <1>
> +The first cell is the PHY ID:
> +0 - PCIe RC 0
> +1 - PCIe RC 1
> +
> +Example:
> + pcie_phy: phy@0301d0a0 {
> + compatible = "brcm,cygnus-pcie-phy";
> + reg = <0x0301d0a0 0x14>;
> + #phy-cells = <1>;
> + };
> +
> + pcie0: pcie@18012000 {
> + ...
> + ...
> + phys = <&pcie_phy 0>;
> + phy-names = "pcie-phy";
> + };
> +
> + pcie1: pcie@18013000 {
> + ...
> + ...
> + phys = <&pcie_phy 1>;
> + phy-names = "pcie-phy";
> + };
>


\
 
 \ /
  Last update: 2015-09-18 08:41    [W:0.172 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site