lkml.org 
[lkml]   [2015]   [Sep]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 3/3] clk: rockchip: add clock controller for rk3036
On 2015年08月28日 17:54, Heiko Stuebner wrote:
> Hi,
>
> Am Freitag, 28. August 2015, 13:46:48 schrieb Xing Zheng:
>> Add the clock tree definition for the new rk3036 SoC,
>> but there are some issues to be fixed:
>> 1. soc will crash if gpll run rate_change_remuxed
>> 2. rk3036_clk_suspend and rk3036_clk_resume should be done
>> in clk-rk3036.c
>>
>> ---
>>
>> Changes in v1:
>> Signed-off-by: Xing Zheng<zhengxing@rock-chips.com>
>>
>> drivers/clk/rockchip/Makefile | 1 +
>> drivers/clk/rockchip/clk-pll.c | 247 ++++++++++++++-
> please split this into separate patches.
> - addition of the new pll type
> - three patches for binding-document, dt-binding header and clock controller
> like in "clk: rockchip: add support for the clock-tree of the rk3368"
> patches 4, 5 and 7:
> "dt-bindings: add documentation of rk3036 clock controller"
> "clk: rockchip: add dt-binding header for rk3036"
> "clk: rockchip: add rk3036 clock controller"
>
> so you should get in sum 4 clock patches.
>
> [0]http://lists.infradead.org/pipermail/linux-rockchip/2015-July/003394.html
OK.
>> drivers/clk/rockchip/clk-rk3036.c | 539
>> ++++++++++++++++++++++++++++++++ drivers/clk/rockchip/clk.h |
>> 30 ++
>> include/dt-bindings/clock/rk3036-cru.h | 247 +++++++++++++++
>> 5 files changed, 1063 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/clk/rockchip/clk-rk3036.c
>> create mode 100644 include/dt-bindings/clock/rk3036-cru.h
>>
>> diff --git a/drivers/clk/rockchip/Makefile b/drivers/clk/rockchip/Makefile
>> index b27edd6..d599829 100644
>> --- a/drivers/clk/rockchip/Makefile
>> +++ b/drivers/clk/rockchip/Makefile
>> @@ -10,6 +10,7 @@ obj-y += clk-inverter.o
>> obj-y += clk-mmc-phase.o
>> obj-$(CONFIG_RESET_CONTROLLER) += softrst.o
>>
>> +obj-y += clk-rk3036.o
>> obj-y += clk-rk3188.o
>> obj-y += clk-rk3288.o
>> obj-y += clk-rk3368.o
>> diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
>> index 96903ae..cf56826 100644
>> --- a/drivers/clk/rockchip/clk-pll.c
>> +++ b/drivers/clk/rockchip/clk-pll.c
>> @@ -2,6 +2,9 @@
>> * Copyright (c) 2014 MundoReader S.L.
>> * Author: Heiko Stuebner<heiko@sntech.de>
>> *
>> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
>> + * Author: Xing Zheng<zhengxing@rock-chips.com>
>> + *
>> * This program is free software; you can redistribute it and/or modify
>> * it under the terms of the GNU General Public License as published by
>> * the Free Software Foundation; either version 2 of the License, or
>> @@ -48,6 +51,8 @@ struct rockchip_clk_pll {
>> #define to_rockchip_clk_pll_nb(nb) \
>> container_of(nb, struct rockchip_clk_pll, clk_nb)
>>
>> +static int rockchip_rk3036_pll_wait_lock(struct rockchip_clk_pll *pll);
>> +
>> static const struct rockchip_pll_rate_table *rockchip_get_pll_settings(
>> struct rockchip_clk_pll *pll, unsigned long rate)
>> {
>> @@ -90,6 +95,11 @@ static int rockchip_pll_wait_lock(struct rockchip_clk_pll
>> *pll) unsigned int val;
>> int delay = 24000000, ret;
>>
>> + /* the plls of rk3036 wait lock */
>> + if (pll->type == pll_rk3036 || pll->lock_offset == -1) {
>> + return rockchip_rk3036_pll_wait_lock(pll);
>> + }
>> +
> according to the rk3036 trm I have the GRF_SOC_STATUS0 [6:4] also contains the
> pll lock status like on the other socs. So you could just use the default
> mechanism of asking the GRF lock status like the other socs do, without
> needing to override the wait_lock .
Oh, sorry, I missed this advice. I will check and test on next version.
>
>> while (delay> 0) {
>> ret = regmap_read(grf, pll->lock_offset,&val);
>> if (ret) {
>> @@ -305,6 +315,235 @@ static void rockchip_rk3066_pll_init(struct clk_hw
>> *hw) rockchip_rk3066_pll_set_rate(hw, drate, prate);
>> }
>> }
>> +/**
>> + * PLL used in RK3036
>> + */
>> +
>> +#define RK3036_PLL_RESET_DELAY(nr) ((nr * 500) / 24 + 1)
>> +
>> +#define RK3036_PLLCON(i) (i * 0x4)
>> +#define RK3036_PLLCON0_FBDIV_MASK 0xfff
>> +#define RK3036_PLLCON0_FBDIV_SHIFT 0
>> +#define RK3036_PLLCON0_POSTDIV1_MASK 0x7
>> +#define RK3036_PLLCON0_POSTDIV1_SHIFT 12
>> +#define RK3036_PLLCON1_REFDIV_MASK 0x3f
>> +#define RK3036_PLLCON1_REFDIV_SHIFT 0
>> +#define RK3036_PLLCON1_POSTDIV2_MASK 0x7
>> +#define RK3036_PLLCON1_POSTDIV2_SHIFT 6
>> +#define RK3036_PLLCON1_DSMPD_MASK 0x1
>> +#define RK3036_PLLCON1_DSMPD_SHIFT 12
>> +#define RK3036_PLLCON2_FRAC_MASK 0xffffff
>> +#define RK3036_PLLCON2_FRAC_SHIFT 0
>> +
>> +#define RK3036_MODECON 0x40
>> +#define RK3036_MODECON_AWM (1<< 0) /* apll work mode */
>> +
>> +#define RK3036_PLLCON0_BYPASS (1<< 15)
>> +#define RK3036_PLLCON1_LOCK_STATUS (1<< 10)
>> +#define RK3036_PLLCON1_RESET (1<< 14)
>> +
>> +static int rockchip_rk3036_pll_wait_lock(struct rockchip_clk_pll *pll)
>> +{
>> + u32 pllcon;
>> + int delay = 24000000;
>> +
>> + /* poll check the lock status in rk3036 xPLLCON1 */
>> + while (delay> 0) {
>> + pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(1));
>> + if (pllcon& RK3036_PLLCON1_LOCK_STATUS)
>> + return 0;
>> +
>> + delay--;
>> + }
>> +
>> + pr_err("%s: timeout waiting for pll to lock\n", __func__);
>> + return -ETIMEDOUT;
>> +}
>> +
>> +static unsigned long rockchip_rk3036_pll_recalc_rate(struct clk_hw *hw,
>> + unsigned long prate)
>> +{
>> + struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
>> + unsigned int fbdiv, postdiv1, refdiv, postdiv2, dsmpd, frac;
>> + u64 rate64 = prate;
>> + u32 pllcon;
>> +
>> + pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(0));
>> + fbdiv = ((pllcon>> RK3036_PLLCON0_FBDIV_SHIFT)&
>> RK3036_PLLCON0_FBDIV_MASK); + postdiv1 = ((pllcon>>
>> RK3036_PLLCON0_POSTDIV1_SHIFT)& RK3036_PLLCON0_POSTDIV1_MASK); +
>> + pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(1));
>> + refdiv = ((pllcon>> RK3036_PLLCON1_REFDIV_SHIFT)&
>> RK3036_PLLCON1_REFDIV_MASK); + postdiv2 = ((pllcon>>
>> RK3036_PLLCON1_POSTDIV2_SHIFT)& RK3036_PLLCON1_POSTDIV2_MASK); + dsmpd =
>> ((pllcon>> RK3036_PLLCON1_DSMPD_SHIFT)& RK3036_PLLCON1_DSMPD_MASK); +
>> + pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(2));
>> + frac = ((pllcon>> RK3036_PLLCON2_FRAC_SHIFT)& RK3036_PLLCON2_FRAC_MASK);
>> +
>> + rate64 *= fbdiv;
>> + do_div(rate64, refdiv);
>> +
>> + if (dsmpd == 0) {
>> + /* fractional mode */
>> + u64 frac_rate64 = prate * frac;
>> +
>> + do_div(frac_rate64, refdiv);
>> + rate64 += frac_rate64>> 24;
>> + }
>> +
>> + do_div(rate64, postdiv1);
>> + do_div(rate64, postdiv2);
>> +
>> + return (unsigned long)rate64;
>> +}
>> +
>> +static int rockchip_rk3036_pll_set_rate(struct clk_hw *hw, unsigned long
>> drate, + unsigned long prate)
>> +{
>> + struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
>> + const struct rockchip_pll_rate_table *rate;
>> + unsigned long old_rate = rockchip_rk3036_pll_recalc_rate(hw, prate);
>> + struct regmap *grf = rockchip_clk_get_grf();
>> + struct clk_mux *pll_mux =&pll->pll_mux;
>> + const struct clk_ops *pll_mux_ops = pll->pll_mux_ops;
>> + int rate_change_remuxed = 0;
>> + int cur_parent;
>> + int ret;
>> +
>> + if (IS_ERR(grf)) {
>> + pr_debug("%s: grf regmap not available, aborting rate change\n",
>> + __func__);
>> + return PTR_ERR(grf);
>> + }
>> +
>> + pr_debug("%s: changing %s from %lu to %lu with a parent rate of %lu\n",
>> + __func__, __clk_get_name(hw->clk), old_rate, drate, prate);
>> +
>> + /* Get required rate settings from table */
>> + rate = rockchip_get_pll_settings(pll, drate);
>> + if (!rate) {
>> + pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
>> + drate, __clk_get_name(hw->clk));
>> + return -EINVAL;
>> + }
>> +
>> + pr_debug("%s: rate settings for %lu fbdiv: %d, postdiv1: %d, refdiv: %d,
>> postdiv2: %d, dsmpd: %d, frac: %d\n", + __func__, rate->rate,
>> + rate->fbdiv, rate->postdiv1, rate->refdiv, rate->postdiv2, rate-
>> dsmpd,
>> rate->frac); +
>> + cur_parent = pll_mux_ops->get_parent(&pll_mux->hw);
>> + if (cur_parent == PLL_MODE_NORM) {
>> + pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_SLOW);
>> + rate_change_remuxed = 1;
>> + }
>> +
>> + /* enter reset mode */
>> + writel(HIWORD_UPDATE(1, RK3036_PLLCON1_RESET, 0), pll->reg_base +
>> RK3036_PLLCON(1)); +
>> + /* update pll values */
>> + writel_relaxed(HIWORD_UPDATE(rate->fbdiv, RK3036_PLLCON0_FBDIV_MASK,
>> + RK3036_PLLCON0_FBDIV_SHIFT) |
>> + HIWORD_UPDATE(rate->postdiv1, RK3036_PLLCON0_POSTDIV1_MASK,
>> + RK3036_PLLCON0_POSTDIV1_SHIFT),
>> + pll->reg_base + RK3036_PLLCON(0));
>> +
>> + writel_relaxed(HIWORD_UPDATE(rate->refdiv, RK3036_PLLCON1_REFDIV_MASK,
>> + RK3036_PLLCON1_REFDIV_SHIFT) |
>> + HIWORD_UPDATE(rate->postdiv2, RK3036_PLLCON1_POSTDIV2_MASK,
>> + RK3036_PLLCON1_POSTDIV2_SHIFT) |
>> + HIWORD_UPDATE(rate->dsmpd, RK3036_PLLCON1_DSMPD_MASK,
>> + RK3036_PLLCON1_DSMPD_SHIFT),
>> + pll->reg_base + RK3036_PLLCON(1));
>> +
>> + writel_relaxed(HIWORD_UPDATE(rate->frac, RK3036_PLLCON2_FRAC_MASK,
>> + RK3036_PLLCON2_FRAC_SHIFT),
>> + pll->reg_base + RK3036_PLLCON(2));
>> +
>> + /* recover normal mode and wait the reset_delay */
>> + writel(HIWORD_UPDATE(0, RK3036_PLLCON1_RESET, 0), pll->reg_base +
>> RK3036_PLLCON(1)); + udelay(RK3036_PLL_RESET_DELAY(rate->refdiv));
>> +
>> + /* wait for the pll to lock */
>> + ret = rockchip_pll_wait_lock(pll);
>> + if (ret) {
>> + pr_warn("%s: pll did not lock, trying to restore old rate %lu\n",
>> + __func__, old_rate);
>> + rockchip_rk3036_pll_set_rate(hw, old_rate, prate);
>> + }
>> +
>> +#if 0 /* FIXME: soc will crash if gpll run here */
>> + if (rate_change_remuxed)
>> + pll_mux_ops->set_parent(&pll_mux->hw, PLL_MODE_NORM);
>> +#endif
> please don't leave commented code ("if 0") around and we should of course find
> out what is failing beforehand, so this can be enabled again.
>
> Because as the code stands now, you're running on the gpll all the time.
Done.
>> +
>> + return ret;
>> +}
>> +static void rockchip_rk3036_pll_init(struct clk_hw *hw)
>> +{
>> + struct rockchip_clk_pll *pll = to_rockchip_clk_pll(hw);
>> + const struct rockchip_pll_rate_table *rate;
>> + unsigned int fbdiv, postdiv1, refdiv, postdiv2, dsmpd, frac;
>> + unsigned long drate;
>> + u32 pllcon;
>> +
>> + if (!(pll->flags& ROCKCHIP_PLL_SYNC_RATE))
>> + return;
>> +
>> + drate = __clk_get_rate(hw->clk);
>> + rate = rockchip_get_pll_settings(pll, drate);
>> +
>> + /* when no rate setting for the current rate, rely on clk_set_rate */
>> + if (!rate)
>> + return;
>> +
>> + pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(0));
>> + fbdiv = ((pllcon>> RK3036_PLLCON0_FBDIV_SHIFT)&
>> RK3036_PLLCON0_FBDIV_MASK); + postdiv1 = ((pllcon>>
>> RK3036_PLLCON0_POSTDIV1_SHIFT)& RK3036_PLLCON0_POSTDIV1_MASK); +
>> + pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(1));
>> + refdiv = ((pllcon>> RK3036_PLLCON1_REFDIV_SHIFT)&
>> RK3036_PLLCON1_REFDIV_MASK); + postdiv2 = ((pllcon>>
>> RK3036_PLLCON1_POSTDIV2_SHIFT)& RK3036_PLLCON1_POSTDIV2_MASK); + dsmpd =
>> ((pllcon>> RK3036_PLLCON1_DSMPD_SHIFT)& RK3036_PLLCON1_DSMPD_MASK); +
>> + pllcon = readl_relaxed(pll->reg_base + RK3036_PLLCON(2));
>> + frac = ((pllcon>> RK3036_PLLCON2_FRAC_SHIFT)& RK3036_PLLCON2_FRAC_MASK);
>> +
>> + pr_info("%s: pll %s@%lu: Hz\n", __func__, __clk_get_name(hw->clk), drate);
>> + pr_info("old - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd:
>> %d, frac: %d\n", + fbdiv, postdiv1, refdiv, postdiv2, dsmpd, frac);
>> + pr_info("new - fbdiv: %d, postdiv1: %d, refdiv: %d, postdiv2: %d, dsmpd:
>> %d, frac: %d\n", + rate->fbdiv, rate->postdiv1, rate->refdiv,
>> rate->postdiv2, rate->dsmpd, rate->frac);
> please don't leave pr_info calls for debug messages in the code, like in the
> rk3066 pll-type these should be pr_debug.
Done.
>> +
>> + if (rate->fbdiv != fbdiv || rate->postdiv1 != postdiv1 || rate->refdiv !=
>> refdiv || + rate->postdiv2 != postdiv2 || rate->dsmpd != dsmpd ||
>> rate->frac != frac) { + struct clk *parent = __clk_get_parent(hw->clk);
>> + unsigned long prate;
>> +
>> + if (!parent) {
>> + pr_warn("%s: parent of %s not available\n",
>> + __func__, __clk_get_name(hw->clk));
>> + return;
>> + }
>> +
>> + pr_info("%s: pll %s: rate params do not match rate table,
> adjusting\n",
>> + __func__, __clk_get_name(hw->clk));
>> + prate = __clk_get_rate(parent);
>> + rockchip_rk3036_pll_set_rate(hw, drate, prate);
>> + }
>> +}
>> +static const struct clk_ops rockchip_rk3036_pll_clk_norate_ops = {
>> + .recalc_rate = rockchip_rk3036_pll_recalc_rate,
>> + .round_rate = rockchip_pll_round_rate,
>> + .set_rate = rockchip_rk3036_pll_set_rate,
>> + .init = rockchip_rk3036_pll_init,
>> +};
> the ops for plls without rate table should not contain round_rate and set_rate
> callbacks, as without rate-table you of course cannot set any rate
Done.
>> +
>> +static const struct clk_ops rockchip_rk3036_pll_clk_ops = {
>> + .recalc_rate = rockchip_rk3036_pll_recalc_rate,
>> + .round_rate = rockchip_pll_round_rate,
>> + .set_rate = rockchip_rk3036_pll_set_rate,
>> + .init = rockchip_rk3036_pll_init,
>> +};
> The rk3036 pll-type also has a powerdown function it seems (xPLL_CON1[13]), so
> you can also add appropriate enable, disable and is_enabled callbacks for both
> ops structs.
Done.
>> static const struct clk_ops rockchip_rk3066_pll_clk_norate_ops = {
>> .recalc_rate = rockchip_rk3066_pll_recalc_rate,
>> @@ -385,6 +624,12 @@ struct clk *rockchip_clk_register_pll(enum
>> rockchip_pll_type pll_type, else
>> init.ops =&rockchip_rk3066_pll_clk_ops;
>> break;
>> + case pll_rk3036:
>> + if (!pll->rate_table)
>> + init.ops =&rockchip_rk3036_pll_clk_norate_ops;
>> + else
>> + init.ops =&rockchip_rk3036_pll_clk_ops;
>> + break;
>> default:
>> pr_warn("%s: Unknown pll type for pll clk %s\n",
>> __func__, name);
>> @@ -408,7 +653,7 @@ struct clk *rockchip_clk_register_pll(enum
>> rockchip_pll_type pll_type, pll_mux->lock = lock;
>> pll_mux->hw.init =&init;
>>
>> - if (pll_type == pll_rk3066)
>> + if (pll_type == pll_rk3066 || pll_type == pll_rk3036)
>> pll_mux->flags |= CLK_MUX_HIWORD_MASK;
>>
>> pll_clk = clk_register(NULL,&pll->hw);
>> diff --git a/drivers/clk/rockchip/clk-rk3036.c
>> b/drivers/clk/rockchip/clk-rk3036.c new file mode 100644
>> index 0000000..19cdf0e
>> --- /dev/null
>> +++ b/drivers/clk/rockchip/clk-rk3036.c
>> @@ -0,0 +1,539 @@
>> +/*
>> + * Copyright (c) 2014 MundoReader S.L.
>> + * Author: Heiko Stuebner<heiko@sntech.de>
>> + *
>> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
>> + * Author: Xing Zheng<zhengxing@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +#include<linux/clk-provider.h>
>> +#include<linux/of.h>
>> +#include<linux/of_address.h>
>> +#include<linux/syscore_ops.h>
>> +#include<dt-bindings/clock/rk3036-cru.h>
>> +#include "clk.h"
>> +
>> +enum rk3036_plls {
>> + apll, dpll, gpll,
>> +};
>> +
>> +static struct rockchip_pll_rate_table rk3036_pll_rates[] = {
>> + /* _mhz, _refdiv, _fbdiv, _postdiv1, _postdiv2, _dsmpd, _frac */
>> + RK3036_PLL_RATE(1608000000, 1, 67, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1584000000, 1, 66, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1560000000, 1, 65, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1536000000, 1, 64, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1512000000, 1, 63, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1488000000, 1, 62, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1464000000, 1, 61, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1440000000, 1, 60, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1416000000, 1, 59, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1392000000, 1, 58, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1368000000, 1, 57, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1344000000, 1, 56, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1320000000, 1, 55, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1296000000, 1, 54, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1272000000, 1, 53, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1248000000, 1, 52, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1200000000, 1, 50, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1188000000, 2, 99, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1104000000, 1, 46, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1100000000, 12, 550, 1, 1, 1, 0),
>> + RK3036_PLL_RATE(1008000000, 1, 84, 2, 1, 1, 0),
>> + RK3036_PLL_RATE(1000000000, 6, 500, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 984000000, 1, 82, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 960000000, 1, 80, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 936000000, 1, 78, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 912000000, 1, 76, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 900000000, 4, 300, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 888000000, 1, 74, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 864000000, 1, 72, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 840000000, 1, 70, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 816000000, 1, 68, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 800000000, 6, 400, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 700000000, 6, 350, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 696000000, 1, 58, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 600000000, 1, 75, 3, 1, 1, 0),
>> + RK3036_PLL_RATE( 594000000, 2, 99, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 504000000, 1, 63, 3, 1, 1, 0),
>> + RK3036_PLL_RATE( 500000000, 6, 250, 2, 1, 1, 0),
>> + RK3036_PLL_RATE( 408000000, 1, 68, 2, 2, 1, 0),
>> + RK3036_PLL_RATE( 312000000, 1, 52, 2, 2, 1, 0),
>> + RK3036_PLL_RATE( 216000000, 1, 72, 4, 2, 1, 0),
>> + RK3036_PLL_RATE( 96000000, 1, 64, 4, 4, 1, 0),
>> + RK3036_PLL_RATE(0, 1, 0, 1, 1, 1, 0),
>> + { /* sentinel */ },
>> +};
>> +
>> +#define RK3036_DIV_CPU_MASK 0x1f
>> +#define RK3036_DIV_CPU_SHIFT 8
>> +
>> +#define RK3036_DIV_PERI_MASK 0xf
>> +#define RK3036_DIV_PERI_SHIFT 0
>> +#define RK3036_DIV_ACLK_MASK 0x7
>> +#define RK3036_DIV_ACLK_SHIFT 4
>> +#define RK3036_DIV_HCLK_MASK 0x3
>> +#define RK3036_DIV_HCLK_SHIFT 8
>> +#define RK3036_DIV_PCLK_MASK 0x7
>> +#define RK3036_DIV_PCLK_SHIFT 12
>> +
>> +#define RK3036_CLKSEL1(_core_periph_div) \
>> + { \
>> + .reg = RK2928_CLKSEL_CON(1), \
>> + .val = HIWORD_UPDATE(_core_periph_div, RK3036_DIV_PERI_MASK, \
>> + RK3036_DIV_PERI_SHIFT) \
>> + }
>> +
>> +#define RK3036_CPUCLK_RATE(_prate, _core_periph_div) \
>> + { \
>> + .prate = _prate, \
>> + .divs = { \
>> + RK3036_CLKSEL1(_core_periph_div), \
>> + }, \
>> + }
>> +
>> +static struct rockchip_cpuclk_rate_table rk3036_cpuclk_rates[] __initdata =
>> { + RK3036_CPUCLK_RATE(816000000, 4),
>> + RK3036_CPUCLK_RATE(600000000, 4),
>> + RK3036_CPUCLK_RATE(312000000, 4),
>> +};
> this seems to be missing divider settings for aclk_core? I only see the core-
> periph ones (for pclk_dbg) but not for aclk_core that is also sourced from the
> cpuclk?
Yes, I will check them again.
>
>> +
>> +static const struct rockchip_cpuclk_reg_data rk3036_cpuclk_data = {
>> + .core_reg = RK2928_CLKSEL_CON(0),
>> + .div_core_shift = 0,
>> + .div_core_mask = 0x1f,
>> + .mux_core_shift = 7,
>> +};
>> +
>> +PNAME(mux_pll_p) = { "xin24m", "xin24m" };
>> +
>> +PNAME(mux_armclk_p) = { "apll", "gpll_armclk" };
>> +PNAME(mux_busclk_p) = { "apll", "dpll_cpu", "gpll_cpu" };
>> +PNAME(mux_ddrphy_p) = { "dpll_ddr", "gpll_ddr" };
>> +PNAME(mux_pll_src_3plls_p) = { "apll", "dpll", "gpll" };
>> +PNAME(mux_timer_p) = { "xin24m", "pclk_peri_src" };
>> +
>> +PNAME(mux_pll_src_apll_gpll_dpll_usb480m_p) = { "apll", "gpll", "dpll"
>> "usb480m" }; +
>> +PNAME(mux_mmc_src_p) = { "apll", "gpll", "dpll", "xin24m" };
>> +PNAME(mux_i2s_pre_p) = { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" };
>> +PNAME(mux_i2s_clkout_p) = { "i2s_pre", "xin12m" };
>> +PNAME(mux_spdif_p) = { "spdif_src", "spdif_frac", "xin12m" };
>> +PNAME(mux_uart0_p) = { "uart0_src", "uart0_frac", "xin24m" };
>> +PNAME(mux_uart1_p) = { "uart1_src", "uart1_frac", "xin24m" };
>> +PNAME(mux_uart2_p) = { "uart2_src", "uart2_frac", "xin24m" };
>> +PNAME(mux_mac_p) = { "mac_pll_src", "ext_gmac" };
>> +PNAME(mux_dclk_p) = { "dclk_lcdc", "dclk_hdmi_src" };
>> +
>> +static struct rockchip_pll_clock rk3036_pll_clks[] __initdata = {
>> + [apll] = PLL(pll_rk3036, PLL_APLL, "apll", mux_pll_p, 0,
>> RK2928_PLL_CON(0), + RK2928_MODE_CON, 0, 10, 0, rk3036_pll_rates),
>> + [dpll] = PLL(pll_rk3036, PLL_DPLL, "dpll", mux_pll_p, 0,
>> RK2928_PLL_CON(4), + RK2928_MODE_CON, 4, 10, 0, NULL),
>> + [gpll] = PLL(pll_rk3036, PLL_GPLL, "gpll", mux_pll_p, 0,
>> RK2928_PLL_CON(12), + RK2928_MODE_CON, 12, 10,
>> ROCKCHIP_PLL_SYNC_RATE, rk3036_pll_rates), +};
>> +
>> +#define MFLAGS CLK_MUX_HIWORD_MASK
>> +#define DFLAGS CLK_DIVIDER_HIWORD_MASK
>> +#define GFLAGS (CLK_GATE_HIWORD_MASK | CLK_GATE_SET_TO_DISABLE)
>> +
>> +static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
>> + /*
>> + * Clock-Architecture Diagram 1
>> + */
>> +
>> + /* PD_CORE */
>> + GATE(0, "gpll_armclk", "gpll", CLK_IGNORE_UNUSED,
>> + RK2928_CLKGATE_CON(0), 6, GFLAGS),
>> +
>> + /* PD_DDR */
>> + GATE(0, "dpll_ddr", "dpll", CLK_IGNORE_UNUSED,
>> + RK2928_CLKGATE_CON(0), 2, GFLAGS),
>> + GATE(0, "gpll_ddr", "gpll", 0,
>> + RK2928_CLKGATE_CON(0), 8, GFLAGS),
>> + COMPOSITE_NOGATE(0, "ddrphy2x", mux_ddrphy_p, CLK_IGNORE_UNUSED,
>> + RK2928_CLKSEL_CON(26), 8, 1, MFLAGS, 0, 2,
>> + DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
> please keep the formatting. With the big number of clock definitions, reading
> is easier if everything stays in one place without additional line-breaks.
> So please move the "DFLAGS | ..." part up into the previous line. (same if
> this occures somewhere lese)
Done.
>
>> +
>> + /* PD_CORE */
>> + COMPOSITE_NOMUX(0, "pclk_dbg", "armclk", CLK_IGNORE_UNUSED,
>> + RK2928_CLKSEL_CON(1), 0, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
>> + RK2928_CLKGATE_CON(0), 7, GFLAGS),
>> + COMPOSITE_NOMUX(0, "aclk_core_pre", "armclk", 0,
>> + RK2928_CLKSEL_CON(1), 4, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
>> + RK2928_CLKGATE_CON(0), 7, GFLAGS),
>> +
>> + /* PD_CPU (BUS) */
>> + GATE(0, "dpll_cpu", "dpll", 0, RK2928_CLKGATE_CON(10), 8, GFLAGS),
>> + GATE(0, "gpll_cpu", "gpll", 0, RK2928_CLKGATE_CON(0), 1, GFLAGS),
>> + COMPOSITE_NOGATE(0, "aclk_cpu_src", mux_busclk_p, 0,
>> + RK2928_CLKSEL_CON(0), 14, 2, MFLAGS, 8, 5, DFLAGS),
>> + GATE(ACLK_CPU, "aclk_cpu", "aclk_cpu_src", 0, RK2928_CLKGATE_CON(0), 3,
>> GFLAGS), + COMPOSITE_NOMUX(PCLK_CPU, "pclk_cpu", "aclk_cpu_src", 0,
>> + RK2928_CLKSEL_CON(1), 12, 3, DFLAGS | CLK_DIVIDER_READ_ONLY,
>> + RK2928_CLKGATE_CON(0), 5, GFLAGS),
>> + COMPOSITE_NOMUX(HCLK_CPU, "hclk_cpu", "aclk_cpu_src", 0,
>> + RK2928_CLKSEL_CON(1), 8, 2, DFLAGS | CLK_DIVIDER_READ_ONLY,
>> + RK2928_CLKGATE_CON(0), 4, GFLAGS),
>> +
>> + /* PD_PERI */
>> + COMPOSITE(0, "aclk_peri_src", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(10), 14, 2, MFLAGS, 0, 5, DFLAGS,
>> + RK2928_CLKGATE_CON(2), 0, GFLAGS),
>> +
>> + GATE(ACLK_PERI, "aclk_peri", "aclk_peri_src", 0,
>> + RK2928_CLKGATE_CON(2), 1, GFLAGS),
>> + /* pclk_peri_src is soure for timers */
>> + DIV(0, "pclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
>> + RK2928_CLKSEL_CON(10), 12, 2, DFLAGS |
> CLK_DIVIDER_POWER_OF_TWO),
>> + GATE(PCLK_PERI, "pclk_peri", "pclk_peri_src", 0,
>> + RK2928_CLKGATE_CON(2), 3, GFLAGS),
>> + /* hclk_peri_src is soure for sclk_macref_out */
>> + DIV(0, "hclk_peri_src", "aclk_peri_src", CLK_IGNORE_UNUSED,
>> + RK2928_CLKSEL_CON(10), 8, 2, DFLAGS | CLK_DIVIDER_POWER_OF_TWO),
>> + GATE(HCLK_PERI, "hclk_peri", "hclk_peri_src", 0,
>> + RK2928_CLKGATE_CON(2), 2, GFLAGS),
>> +
>> + /* PD_TIMER */
>> + COMPOSITE_NODIV(SCLK_TIMER0, "sclk_timer0", mux_timer_p, 0,
>> + RK2928_CLKSEL_CON(2), 4, 1, DFLAGS,
>> + RK2928_CLKGATE_CON(1), 0, GFLAGS),
>> + COMPOSITE_NODIV(SCLK_TIMER1, "sclk_timer1", mux_timer_p, 0,
>> + RK2928_CLKSEL_CON(2), 5, 1, DFLAGS,
>> + RK2928_CLKGATE_CON(1), 1, GFLAGS),
>> + COMPOSITE_NODIV(SCLK_TIMER2, "sclk_timer2", mux_timer_p, 0,
>> + RK2928_CLKSEL_CON(2), 6, 1, DFLAGS,
>> + RK2928_CLKGATE_CON(2), 4, GFLAGS),
>> + COMPOSITE_NODIV(SCLK_TIMER3, "sclk_timer3", mux_timer_p, 0,
>> + RK2928_CLKSEL_CON(2), 7, 1, DFLAGS,
>> + RK2928_CLKGATE_CON(2), 5, GFLAGS),
>> +
>> + /* PD_UART */
>> + MUX(0, "uart_pll_clk", mux_pll_src_apll_gpll_dpll_usb480m_p, 0,
>> + RK2928_CLKSEL_CON(13), 10, 2, MFLAGS),
>> + COMPOSITE_NOMUX(0, "uart0_src", "uart_pll_clk", 0,
>> + RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
>> + RK2928_CLKGATE_CON(1), 8, GFLAGS),
>> + COMPOSITE_NOMUX(0, "uart1_src", "uart_pll_clk", 0,
>> + RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
>> + RK2928_CLKGATE_CON(1), 8, GFLAGS),
>> + COMPOSITE_NOMUX(0, "uart2_src", "uart_pll_clk", 0,
>> + RK2928_CLKSEL_CON(13), 0, 7, DFLAGS,
>> + RK2928_CLKGATE_CON(1), 8, GFLAGS),
>> + COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", CLK_SET_RATE_PARENT,
>> + RK2928_CLKSEL_CON(17), 0,
>> + RK2928_CLKGATE_CON(1), 9, GFLAGS),
>> + COMPOSITE_FRAC(0, "uart1_frac", "uart1_src", CLK_SET_RATE_PARENT,
>> + RK2928_CLKSEL_CON(18), 0,
>> + RK2928_CLKGATE_CON(1), 11, GFLAGS),
>> + COMPOSITE_FRAC(0, "uart2_frac", "uart2_src", CLK_SET_RATE_PARENT,
>> + RK2928_CLKSEL_CON(19), 0,
>> + RK2928_CLKGATE_CON(1), 13, GFLAGS),
>> + MUX(SCLK_UART0, "sclk_uart0", mux_uart0_p, CLK_SET_RATE_PARENT,
>> + RK2928_CLKSEL_CON(13), 8, 2, MFLAGS),
>> + MUX(SCLK_UART1, "sclk_uart1", mux_uart1_p, CLK_SET_RATE_PARENT,
>> + RK2928_CLKSEL_CON(14), 8, 2, MFLAGS),
>> + MUX(SCLK_UART2, "sclk_uart2", mux_uart2_p, CLK_SET_RATE_PARENT,
>> + RK2928_CLKSEL_CON(15), 8, 2, MFLAGS),
>> +
>> + /* PD_VIDEO */
>> + COMPOSITE(0, "aclk_vcodec", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(32), 14, 2, MFLAGS, 8, 5, DFLAGS,
>> + RK2928_CLKGATE_CON(3), 11, GFLAGS),
>> +
>> + COMPOSITE(0, "aclk_hvec", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(20), 0, 2, MFLAGS, 2, 5, DFLAGS,
>> + RK2928_CLKGATE_CON(10), 6, GFLAGS),
>> +
>> + /* PD_VIO */
>> + COMPOSITE(0, "aclk_disp1_pre", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(31), 14, 2, MFLAGS, 8, 5, DFLAGS,
>> + RK2928_CLKGATE_CON(1), 4, GFLAGS),
>> + COMPOSITE(0, "hclk_disp_pre", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(30), 14, 2, MFLAGS, 8, 5, DFLAGS,
>> + RK2928_CLKGATE_CON(0), 11, GFLAGS),
>> + COMPOSITE(DCLK_LCDC, "dclk_lcdc", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
>> + RK2928_CLKGATE_CON(3), 2, GFLAGS),
>> +
>> + /* MMC */
>> + COMPOSITE_NODIV(0, "sclk_sdmmc_src", mux_mmc_src_p, 0,
>> + RK2928_CLKSEL_CON(12), 8, 2, DFLAGS,
>> + RK2928_CLKGATE_CON(2), 11, GFLAGS),
>> + DIV(SCLK_SDMMC, "sclk_sdmmc", "sclk_sdmmc_src", 0,
>> + RK2928_CLKSEL_CON(11), 0, 7, DFLAGS),
>> +
>> + COMPOSITE_NODIV(0, "sclk_sdio_src", mux_mmc_src_p, 0,
>> + RK2928_CLKSEL_CON(12), 10, 2, DFLAGS,
>> + RK2928_CLKGATE_CON(2), 13, GFLAGS),
>> + DIV(SCLK_SDIO, "sclk_sdio", "sclk_sdio_src", 0,
>> + RK2928_CLKSEL_CON(11), 8, 7, DFLAGS),
>> +
>> + COMPOSITE(SCLK_EMMC, "sclk_emmc", mux_mmc_src_p, 0,
>> + RK2928_CLKSEL_CON(12), 12, 2, MFLAGS, 0, 7, DFLAGS,
>> + RK2928_CLKGATE_CON(2), 14, GFLAGS),
>> +
>> + MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "sclk_sdmmc", RK3036_SDMMC_CON0,
>> 1), + MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "sclk_sdmmc",
>> RK3036_SDMMC_CON1, 0), +
>> + MMC(SCLK_SDIO_DRV, "sdio_drv", "sclk_sdio", RK3036_SDIO_CON0, 1),
>> + MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "sclk_sdio", RK3036_SDIO_CON1, 0),
>> +
>> + MMC(SCLK_EMMC_DRV, "emmc_drv", "sclk_emmc", RK3036_EMMC_CON0,
>> 1), + MMC(SCLK_EMMC_SAMPLE, "emmc_sample", "sclk_emmc",
>> RK3036_EMMC_CON1, 0), +
>> + /* I2S */
>> + COMPOSITE(0, "i2s_src", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(3), 14, 1, MFLAGS, 0, 7, DFLAGS,
>> + RK2928_CLKGATE_CON(0), 9, GFLAGS),
>> + COMPOSITE_FRAC(0, "i2s_frac", "i2s_src", CLK_SET_RATE_PARENT,
>> + RK2928_CLKSEL_CON(7), 0,
>> + RK2928_CLKGATE_CON(0), 10, GFLAGS),
>> + MUX(0, "i2s_pre", mux_i2s_pre_p, CLK_SET_RATE_PARENT,
>> + RK2928_CLKSEL_CON(3), 8, 2, MFLAGS),
>> + COMPOSITE_NODIV(SCLK_I2S_OUT, "i2s_clkout", mux_i2s_clkout_p, 0,
>> + RK2928_CLKSEL_CON(4), 12, 1, MFLAGS,
>> + RK2928_CLKGATE_CON(0), 13, GFLAGS),
>> + GATE(SCLK_I2S, "sclk_i2s", "i2s_pre", CLK_SET_RATE_PARENT,
>> + RK2928_CLKGATE_CON(0), 14, GFLAGS),
>> +
>> + COMPOSITE(0, "spdif_src", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(5), 10, 2, MFLAGS, 0, 7, DFLAGS,
>> + RK2928_CLKGATE_CON(2), 10, GFLAGS),
>> + COMPOSITE_FRAC(0, "spdif_frac", "spdif_src", 0,
>> + RK2928_CLKSEL_CON(9), 0,
>> + RK2928_CLKGATE_CON(2), 12, GFLAGS),
>> + MUX(SCLK_SPDIF, "sclk_spdif", mux_spdif_p, 0,
>> + RK2928_CLKSEL_CON(5), 8, 2, MFLAGS),
>> + /* USB */
>> + GATE(0, "hsicphy12m_xin12m", "xin12m", 0,
>> + RK2928_CLKGATE_CON(1), 5, GFLAGS),
>> +
>> + /* GPU */
> some of these comments are redundant ... if the clock is already named
> sclk_gpu a comment GPU above does not help any :-)
>
> Same for SPI, NANDC and everything else you might find.
Done.
>
>> + COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(34), 8, 2, MFLAGS, 0, 5, DFLAGS,
>> + RK2928_CLKGATE_CON(3), 13, GFLAGS),
>> +
>> + /* SPI */
>> + COMPOSITE(SCLK_SPI, "sclk_spi", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(25), 8, 2, MFLAGS, 0, 7, DFLAGS,
>> + RK2928_CLKGATE_CON(2), 9, GFLAGS),
>> +
>> + /* NANDC */
>> + COMPOSITE(SCLK_NANDC, "sclk_nandc", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(16), 8, 2, MFLAGS, 10, 5, DFLAGS,
>> + RK2928_CLKGATE_CON(10), 4, GFLAGS),
>> +
>> + /* SFC */
>> + COMPOSITE(SCLK_SFC, "sclk_sfc", mux_pll_src_apll_gpll_dpll_usb480m_p, 0,
>> + RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
>> + RK2928_CLKGATE_CON(10), 5, GFLAGS),
>> +
>> + /* MAC */
>> + COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 4, 5, DFLAGS),
>> + /* for clk_mac_ref& clk_mac_refout */
>> + MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
>> + RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
>> +
>> + COMPOSITE_NOMUX(SCLK_MAC, "mac_clk", "mac_clk_ref", 0,
>> + RK2928_CLKSEL_CON(21), 9, 5, DFLAGS,
>> + RK2928_CLKGATE_CON(2), 6, GFLAGS),
>> +
> The hdmi diagram is actually labeled "Clock Architecture Diagram 2"
Done.
>> + /* HDMI */
>> + /* total clks: pin_sys_clk / pin_sck / pin_mclk / pin_vclk /
>> pin_vclk_pllref */ + /* the same with dclk_lcdc */
>> + COMPOSITE(0, "dclk_hdmi_src", mux_pll_src_3plls_p, 0,
>> + RK2928_CLKSEL_CON(28), 0, 2, MFLAGS, 8, 8, DFLAGS,
>> + RK2928_CLKGATE_CON(3), 2, GFLAGS),
>> + /* hdmi dclk from dclk_lcdc directly */
>> + MUX(SCLK_HDMI, "dclk_hdmi", mux_dclk_p, 0,
>> + RK2928_CLKSEL_CON(31), 0, 1, MFLAGS),
>> +
>> + /*
>> + * Clock-Architecture Diagram 2
> The gates are in Diagram 3 in the RK3036 TRM I have
Done.
>
>> + */
>> +
>> + /* aclk_cpu gates */
>> + GATE(0, "sclk_intmem", "aclk_cpu", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(4), 12, GFLAGS), + GATE(0, "aclk_strc_sys", "aclk_cpu",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 10, GFLAGS), +
>> + /* hclk_cpu gates */
>> + GATE(HCLK_ROM, "hclk_rom", "hclk_cpu", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(5), 6, GFLAGS), +
>> + /* pclk_cpu gates */
>> + GATE(PCLK_GRF, "pclk_grf", "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 4,
>> GFLAGS), + GATE(PCLK_DDRUPCTL, "pclk_ddrupctl", "pclk_cpu", 0,
>> RK2928_CLKGATE_CON(5), 7, GFLAGS), + GATE(ACLK_VCODEC, "pclk_acodec",
>> "pclk_cpu", 0, RK2928_CLKGATE_CON(5), 14, GFLAGS), + GATE(PCLK_HDMI,
>> "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS), +
>> + /* aclk_vio gates */
>> + GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", 0,
>> + RK2928_CLKGATE_CON(6), 13, GFLAGS),
>> + GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0,
>> + RK2928_CLKGATE_CON(9), 6, GFLAGS),
>> +
>> + GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", 0,
>> + RK2928_CLKGATE_CON(6), 12, GFLAGS),
>> + GATE(HCLK_LCDC, "hclk_lcdc", "hclk_disp_pre", 0,
>> + RK2928_CLKGATE_CON(9), 5, GFLAGS),
>> +
>> + /* aclk_video gates */
>> + GATE(HCLK_LCDC, "hclk_vcodec", "hclk_disp_pre", 0,
>> + RK2928_CLKGATE_CON(3), 12, GFLAGS),
>> +
>> + /* xin24m gates */
>> + GATE(SCLK_PVTM_CORE, "sclk_pvtm_core", "xin24m", 0,
>> RK2928_CLKGATE_CON(10), 0, GFLAGS), + GATE(SCLK_PVTM_GPU, "sclk_pvtm_gpu",
>> "xin24m", 0, RK2928_CLKGATE_CON(10), 1, GFLAGS), +
>> + /* aclk_peri gates */
>> + GATE(0, "aclk_peri_axi_matrix", "aclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(4), 3, GFLAGS), + GATE(0, "aclk_cpu_peri", "aclk_peri",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 2, GFLAGS), + GATE(ACLK_DMAC2,
>> "aclk_dmac2", "aclk_peri", 0, RK2928_CLKGATE_CON(5), 1, GFLAGS), + GATE(0,
>> "aclk_peri_niu", "aclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 15,
>> GFLAGS), +
>> + /* hclk_peri gates */
>> + GATE(0, "hclk_peri_matrix", "hclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(4), 0, GFLAGS), + GATE(0, "hclk_usb_peri", "hclk_peri",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS), + GATE(0,
>> "hclk_peri_arbi", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9),
>> 14, GFLAGS), + GATE(HCLK_NANDC, "hclk_nandc", "hclk_peri", 0,
>> RK2928_CLKGATE_CON(5), 9, GFLAGS), + GATE(HCLK_SDMMC, "hclk_sdmmc",
>> "hclk_peri", 0, RK2928_CLKGATE_CON(5), 10, GFLAGS), + GATE(HCLK_SDIO,
>> "hclk_sdio", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 11, GFLAGS),
>> + GATE(HCLK_EMMC, "hclk_emmc", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 0,
>> GFLAGS), + GATE(HCLK_OTG0, "hclk_otg0", "hclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(5), 13, GFLAGS), + GATE(HCLK_OTG1, "hclk_otg1",
>> "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 13, GFLAGS),
>> + GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(7), 2, GFLAGS), + GATE(0, "hclk_sfc", "hclk_peri",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS), + GATE(0,
>> "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15,
>> GFLAGS), +
>> + /* pclk_peri gates */
>> + GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED,
>> RK2928_CLKGATE_CON(4), 1, GFLAGS), + GATE(0, "pclk_efuse", "pclk_peri",
>> CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(5), 2, GFLAGS), + GATE(PCLK_TIMER,
>> "pclk_timer0", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 7, GFLAGS),
>> + GATE(PCLK_PWM, "pclk_pwm", "pclk_peri", 0, RK2928_CLKGATE_CON(7), 10,
>> GFLAGS), + GATE(PCLK_SPI, "pclk_spi", "pclk_peri", 0,
>> RK2928_CLKGATE_CON(7), 12, GFLAGS), + GATE(PCLK_WDT, "pclk_wdt",
>> "pclk_peri", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS), + GATE(PCLK_UART0,
>> "pclk_uart0", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 0, GFLAGS),
>> + GATE(PCLK_UART1, "pclk_uart1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 1,
>> GFLAGS), + GATE(PCLK_UART2, "pclk_uart2", "pclk_peri", 0,
>> RK2928_CLKGATE_CON(8), 2, GFLAGS), + GATE(PCLK_I2C0, "pclk_i2c0",
>> "pclk_peri", 0, RK2928_CLKGATE_CON(8), 4, GFLAGS), + GATE(PCLK_I2C1,
>> "pclk_i2c1", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 5, GFLAGS),
>> + GATE(PCLK_I2C2, "pclk_i2c2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 6,
>> GFLAGS), + GATE(PCLK_GPIO0, "pclk_gpio0", "pclk_peri", 0,
>> RK2928_CLKGATE_CON(8), 9, GFLAGS), + GATE(PCLK_GPIO1, "pclk_gpio1",
>> "pclk_peri", 0, RK2928_CLKGATE_CON(8), 10, GFLAGS), + GATE(PCLK_GPIO2,
>> "pclk_gpio2", "pclk_peri", 0, RK2928_CLKGATE_CON(8), 11, GFLAGS), +};
>> +
>> +static const char *const rk3036_critical_clocks[] __initconst = {
>> + "aclk_cpu",
>> + "aclk_peri",
>> + "hclk_peri",
>> +};
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static void __iomem *rk3036_cru_base;
>> +
>> +/* Some CRU registers will be reset in maskrom when the system
>> + * wakes up from fastboot.
>> + * So save them before suspend, restore them after resume.
>> + */
>> +
>> +static int rk3036_clk_suspend(void)
>> +{
>> + /* TODO */
>> +
>> + return 0;
>> +}
>> +
>> +static void rk3036_clk_resume(void)
>> +{
>> + /* TODO */
>> +}
>> +
>> +static struct syscore_ops rk3036_clk_syscore_ops = {
>> + .suspend = rk3036_clk_suspend,
>> + .resume = rk3036_clk_resume,
>> +};
>> +
>> +static void rk3036_clk_sleep_init(void __iomem *reg_base)
>> +{
>> + rk3036_cru_base = reg_base;
>> + register_syscore_ops(&rk3036_clk_syscore_ops);
>> +}
>> +
>> +#else /* CONFIG_PM_SLEEP */
>> +static void rk3036_clk_sleep_init(void __iomem *reg_base) {}
>> +#endif
> please don't add empty "TODO" functions. If you want to work on suspend later,
> just leave this stuff out completely and add it when time comes.
Done.
>
>> +
>> +static void __init rk3036_clk_init(struct device_node *np)
>> +{
>> + void __iomem *reg_base;
>> + struct clk *clk;
>> +
>> + reg_base = of_iomap(np, 0);
>> + if (!reg_base) {
>> + pr_err("%s: could not map cru region\n", __func__);
>> + return;
>> + }
>> +
>> + rockchip_clk_init(np, reg_base, CLK_NR_CLKS);
>> +
>> + /* xin12m is created by an cru-internal divider */
>> + clk = clk_register_fixed_factor(NULL, "xin12m", "xin24m", 0, 1, 2);
>> + if (IS_ERR(clk))
>> + pr_warn("%s: could not register clock xin12m: %ld\n",
>> + __func__, PTR_ERR(clk));
>> +
>> + clk = clk_register_fixed_factor(NULL, "usb480m", "xin24m", 0, 20, 1);
>> + if (IS_ERR(clk))
>> + pr_warn("%s: could not register clock usb480m: %ld\n",
>> + __func__, PTR_ERR(clk));
>> +
>> + clk = clk_register_fixed_factor(NULL, "ddrphy", "ddrphy2x", 0, 1, 2);
>> + if (IS_ERR(clk))
>> + pr_warn("%s: could not register clock ddrphy: %ld\n",
>> + __func__, PTR_ERR(clk));
>> +
>> + clk = clk_register_fixed_factor(NULL, "hclk_vcodec_pre",
>> + "aclk_vcodec", 0, 1, 4);
>> + if (IS_ERR(clk))
>> + pr_warn("%s: could not register clock hclk_vcodec_pre: %ld\n",
>> + __func__, PTR_ERR(clk));
>> +
>> + clk = clk_register_fixed_factor(NULL, "sclk_macref_out",
>> + "hclk_peri_src", 0, 1, 2);
>> + if (IS_ERR(clk))
>> + pr_warn("%s: could not register clock sclk_macref_out: %ld\n",
>> + __func__, PTR_ERR(clk));
>> +
>> + rockchip_clk_register_plls(rk3036_pll_clks,
>> + ARRAY_SIZE(rk3036_pll_clks),
>> + -1);
>> + rockchip_clk_register_branches(rk3036_clk_branches,
>> + ARRAY_SIZE(rk3036_clk_branches));
>> + rockchip_clk_protect_critical(rk3036_critical_clocks,
>> + ARRAY_SIZE(rk3036_critical_clocks));
>> +
>> + rockchip_clk_register_armclk(ARMCLK, "armclk",
>> + mux_armclk_p, ARRAY_SIZE(mux_armclk_p),
>> + &rk3036_cpuclk_data, rk3036_cpuclk_rates,
>> + ARRAY_SIZE(rk3036_cpuclk_rates));
>> +
>> + rockchip_register_softrst(np, 9, reg_base + RK2928_SOFTRST_CON(0),
>> + ROCKCHIP_SOFTRST_HIWORD_MASK);
>> +
>> + rockchip_register_restart_notifier(RK2928_GLB_SRST_FST);
>> + rk3036_clk_sleep_init(reg_base);
>> +}
>> +CLK_OF_DECLARE(rk3036_cru, "rockchip,rk3036-cru", rk3036_clk_init);
>> diff --git a/drivers/clk/rockchip/clk.h b/drivers/clk/rockchip/clk.h
>> index dc8ecb2..6603c07 100644
>> --- a/drivers/clk/rockchip/clk.h
>> +++ b/drivers/clk/rockchip/clk.h
>> @@ -2,6 +2,9 @@
>> * Copyright (c) 2014 MundoReader S.L.
>> * Author: Heiko Stuebner<heiko@sntech.de>
>> *
>> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
>> + * Author: Xing Zheng<zhengxing@rock-chips.com>
>> + *
>> * based on
>> *
>> * samsung/clk.h
>> @@ -40,6 +43,13 @@ struct clk;
>> #define RK2928_SOFTRST_CON(x) ((x) * 0x4 + 0x110)
>> #define RK2928_MISC_CON 0x134
>>
>> +#define RK3036_SDMMC_CON0 0x144
>> +#define RK3036_SDMMC_CON1 0x148
>> +#define RK3036_SDIO_CON0 0x14c
>> +#define RK3036_SDIO_CON1 0x150
>> +#define RK3036_EMMC_CON0 0x154
>> +#define RK3036_EMMC_CON1 0x158
>> +
>> #define RK3288_PLL_CON(x) RK2928_PLL_CON(x)
>> #define RK3288_MODE_CON 0x50
>> #define RK3288_CLKSEL_CON(x) ((x) * 0x4 + 0x60)
>> @@ -75,6 +85,7 @@ struct clk;
>>
>> enum rockchip_pll_type {
>> pll_rk3066,
>> + pll_rk3036,
>> };
>>
>> #define RK3066_PLL_RATE(_rate, _nr, _nf, _no) \
>> @@ -95,12 +106,31 @@ enum rockchip_pll_type {
>> .nb = _nb, \
>> }
>>
>> +#define RK3036_PLL_RATE(_rate, _refdiv, _fbdiv, _postdiv1, \
>> + _postdiv2, _dsmpd, _frac) \
>> +{ \
>> + .rate = _rate##U, \
>> + .fbdiv = _fbdiv, \
>> + .postdiv1 = _postdiv1, \
>> + .refdiv = _refdiv, \
>> + .postdiv2 = _postdiv2, \
>> + .dsmpd = _dsmpd, \
>> + .frac = _frac, \
>> +}
>> +
>> struct rockchip_pll_rate_table {
>> unsigned long rate;
>> unsigned int nr;
>> unsigned int nf;
>> unsigned int no;
>> unsigned int nb;
>> + /* for RK3036 */
>> + unsigned int fbdiv;
>> + unsigned int postdiv1;
>> + unsigned int refdiv;
>> + unsigned int postdiv2;
>> + unsigned int dsmpd;
>> + unsigned int frac;
>> };
>>
>> /**
>> diff --git a/include/dt-bindings/clock/rk3036-cru.h
>> b/include/dt-bindings/clock/rk3036-cru.h new file mode 100644
>> index 0000000..085e4c3
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/rk3036-cru.h
>> @@ -0,0 +1,247 @@
>> +/*
>> + * Copyright (c) 2014 MundoReader S.L.
>> + * Author: Heiko Stuebner<heiko@sntech.de>
>> + *
>> + * Copyright (c) 2015 Rockchip Electronics Co. Ltd.
>> + * Author: Xing Zheng<zhengxing@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +/* core clocks */
>> +#define PLL_APLL 1
>> +#define PLL_DPLL 2
>> +#define PLL_GPLL 3
>> +#define ARMCLK 4
>> +
>> +/* sclk gates (special clocks) */
>> +#define SCLK_GPU 64
>> +#define SCLK_SPI 65
>> +#define SCLK_SDMMC 68
>> +#define SCLK_SDIO 69
>> +#define SCLK_EMMC 71
>> +#define SCLK_NANDC 76
>> +#define SCLK_UART0 77
>> +#define SCLK_UART1 78
>> +#define SCLK_UART2 79
>> +#define SCLK_I2S 82
>> +#define SCLK_SPDIF 83
>> +#define SCLK_TIMER0 85
>> +#define SCLK_TIMER1 86
>> +#define SCLK_TIMER2 87
>> +#define SCLK_TIMER3 88
>> +#define SCLK_OTGPHY0 93
>> +#define SCLK_OTGPHY1 94
>> +#define SCLK_LCDC 100
>> +#define SCLK_HDMI 109
>> +#define SCLK_HEVC 111
>> +#define SCLK_I2S_OUT 113
>> +#define SCLK_SDMMC_DRV 114
>> +#define SCLK_SDIO_DRV 115
>> +#define SCLK_EMMC_DRV 117
>> +#define SCLK_SDMMC_SAMPLE 118
>> +#define SCLK_SDIO_SAMPLE 119
>> +#define SCLK_EMMC_SAMPLE 121
>> +#define SCLK_PVTM_CORE 123
>> +#define SCLK_PVTM_GPU 124
>> +#define SCLK_PVTM_VIDEO 125
>> +#define SCLK_MAC 151
>> +#define SCLK_MACREF 152
>> +#define SCLK_SFC 160
>> +
>> +#define DCLK_LCDC 190
>> +
>> +/* aclk gates */
>> +#define ACLK_DMAC2 194
>> +#define ACLK_LCDC 197
>> +#define ACLK_VIO 203
>> +#define ACLK_VCODEC 208
>> +#define ACLK_CPU 209
>> +#define ACLK_PERI 210
>> +
>> +/* pclk gates */
>> +#define PCLK_GPIO0 320
>> +#define PCLK_GPIO1 321
>> +#define PCLK_GPIO2 322
>> +#define PCLK_GRF 329
>> +#define PCLK_I2C0 332
>> +#define PCLK_I2C1 333
>> +#define PCLK_I2C2 334
>> +#define PCLK_SPI 338
>> +#define PCLK_UART0 341
>> +#define PCLK_UART1 342
>> +#define PCLK_UART2 343
>> +#define PCLK_PWM 350
>> +#define PCLK_TIMER 353
>> +#define PCLK_HDMI 360
>> +#define PCLK_CPU 362
>> +#define PCLK_PERI 363
>> +#define PCLK_DDRUPCTL 364
>> +#define PCLK_WDT 368
>> +
>> +/* hclk gates */
>> +#define HCLK_OTG0 449
>> +#define HCLK_OTG1 450
>> +#define HCLK_NANDC 453
>> +#define HCLK_SDMMC 456
>> +#define HCLK_SDIO 457
>> +#define HCLK_EMMC 459
>> +#define HCLK_I2S 462
>> +#define HCLK_LCDC 465
>> +#define HCLK_ROM 467
>> +#define HCLK_VIO_BUS 472
>> +#define HCLK_VCODEC 476
>> +#define HCLK_CPU 477
>> +#define HCLK_PERI 478
>> +
>> +#define CLK_NR_CLKS (HCLK_PERI + 1)
>> +
>> +/* soft-reset indices */
>> +#define SRST_CORE0 0
>> +#define SRST_CORE1 1
>> +#define SRST_0RES2 2
>> +#define SRST_0RES3 3
>> +#define SRST_CORE0_DBG 4
>> +#define SRST_CORE1_DBG 5
>> +#define SRST_0RES6 6
>> +#define SRST_0RES7 7
>> +#define SRST_CORE0_POR 8
>> +#define SRST_CORE1_POR 9
>> +#define SRST_0RES10 10
>> +#define SRST_0RES11 11
>> +#define SRST_L2C 12
>> +#define SRST_TOPDBG 13
>> +#define SRST_STRC_SYS_A 14
>> +#define SRST_PD_CORE_NIU 15
>> +
>> +#define SRST_TIMER2 16
>> +#define SRST_CPUSYS_H 17
>> +#define SRST_1RES2 18
>> +#define SRST_AHB2APB_H 19
>> +#define SRST_TIMER3 20
>> +#define SRST_INTMEM 21
>> +#define SRST_ROM 22
>> +#define SRST_PERI_NIU 23
>> +#define SRST_I2S 24
>> +#define SRST_DDR_PLL 25
>> +#define SRST_GPU_DLL 26
>> +#define SRST_TIMER0 27
>> +#define SRST_TIMER1 28
>> +#define SRST_CORE_DLL 29
>> +#define SRST_EFUSE_P 30
>> +#define SRST_ACODEC_P 31
>> +
>> +#define SRST_GPIO0 32
>> +#define SRST_GPIO1 33
>> +#define SRST_GPIO2 34
>> +#define SRST_2RES3 35
>> +#define SRST_2RES4 36
>> +#define SRST_2RES5 37
>> +#define SRST_2RES6 38
>> +#define SRST_UART0 39
>> +#define SRST_UART1 40
>> +#define SRST_UART2 41
>> +#define SRST_2RES10 42
>> +#define SRST_I2C0 43
>> +#define SRST_I2C1 44
>> +#define SRST_I2C2 45
>> +#define SRST_2RES14 46
>> +#define SRST_SFC 47
>> +
>> +#define SRST_PWM0 48
>> +#define SRST_3RES1 49
>> +#define SRST_3RES2 50
>> +#define SRST_DAP 51
>> +#define SRST_DAP_SYS 52
>> +#define SRST_3RES5 53
>> +#define SRST_3RES6 54
>> +#define SRST_GRF 55
>> +#define SRST_3RES8 56
>> +#define SRST_PERIPHSYS_A 57
>> +#define SRST_PERIPHSYS_H 58
>> +#define SRST_PERIPHSYS_P 59
>> +#define SRST_3RES12 60
>> +#define SRST_CPU_PERI 61
>> +#define SRST_EMEM_PERI 62
>> +#define SRST_USB_PERI 63
>> +
>> +#define SRST_DMA2 64
>> +#define SRST_4RES1 65
>> +#define SRST_MAC 66
>> +#define SRST_4RES3 67
>> +#define SRST_NANDC 68
>> +#define SRST_USBOTG0 69
>> +#define SRST_4RES6 70
>> +#define SRST_OTGC0 71
>> +#define SRST_USBOTG1 72
>> +#define SRST_4RES9 73
>> +#define SRST_OTGC1 74
>> +#define SRST_4RES11 75
>> +#define SRST_4RES12 76
>> +#define SRST_4RES13 77
>> +#define SRST_4RES14 78
>> +#define SRST_DDRMSCH 79
>> +
>> +#define SRST_5RES0 80
>> +#define SRST_MMC0 81
>> +#define SRST_SDIO 82
>> +#define SRST_EMMC 83
>> +#define SRST_SPI0 84
>> +#define SRST_5RES5 85
>> +#define SRST_WDT 86
>> +#define SRST_5RES7 87
>> +#define SRST_DDRPHY 88
>> +#define SRST_DDRPHY_P 89
>> +#define SRST_DDRCTRL 90
>> +#define SRST_DDRCTRL_P 91
>> +#define SRST_5RES12 92
>> +#define SRST_5RES13 93
>> +#define SRST_5RES14 94
>> +#define SRST_5RES15 95
>> +
>> +#define SRST_HDMI_P 96
>> +#define SRST_6RES1 97
>> +#define SRST_6RES2 98
>> +#define SRST_VIO_BUS_H 99
>> +#define SRST_6RES4 100
>> +#define SRST_6RES5 101
>> +#define SRST_6RES6 102
>> +#define SRST_UTMI0 103
>> +#define SRST_UTMI1 104
>> +#define SRST_USBPOR 105
>> +#define SRST_6RES10 106
>> +#define SRST_6RES11 107
>> +#define SRST_6RES12 108
>> +#define SRST_6RES13 109
>> +#define SRST_6RES14 110
>> +#define SRST_6RES15 111
>> +
>> +#define SRST_VCODEC_A 112
>> +#define SRST_VCODEC_H 113
>> +#define SRST_VIO1_A 114
>> +#define SRST_HEVC 115
>> +#define SRST_VCODEC_NIU_A 116
>> +#define SRST_LCDC1_A 117
>> +#define SRST_LCDC1_H 118
>> +#define SRST_LCDC1_D 119
>> +#define SRST_GPU 120
>> +#define SRST_7RES9 121
>> +#define SRST_GPU_NIU_A 122
>> +#define SRST_7RES11 123
>> +#define SRST_7RES12 124
>> +#define SRST_7RES13 125
>> +#define SRST_7RES14 126
>> +#define SRST_7RES15 127
> please don't add reserved (aka unused) reset slots. Of course the numbering
> stays the same, so just drop the xRESy lines from the definition.
> Same for all xRESy entries in this file.
>
>
>> +
>> +#define SRST_8RES0 128
>> +#define SRST_8RES1 129
>> +#define SRST_8RES2 130
>> +#define SRST_DBG_P 131
Done.




\
 
 \ /
  Last update: 2015-09-17 11:21    [W:0.138 / U:0.732 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site