Messages in this thread | | | Date | Wed, 16 Sep 2015 20:59:54 +0930 | From | Arthur Marsh <> | Subject | Re: [Bugfix 0/3] Convert eata driver to a normal PCI device driver |
| |
Jiang Liu wrote on 16/09/15 17:51:
> Hi Arthur, > It would be great if we could capture the text as in the > picture posted by you at: > http://www.users.on.net/~arthur.marsh/20150915547.jpg > I guess a serial console could help us to capture those > log messages. To use serial console, we need to setup serial cable, > configure grub and kernel to use serial port as console. > Thanks! > Gerry > >> >> Regards, >> >> Arthur. >
I've already included the text of what appeaered in the image above:
sd 0:0:6:0: abort, mbox 63. EATA0: abort, mbox 63 is in use. sd 0:0:6:0: reset, enter. EATA0: reset, mbox 63 in reset. EATA0: reset, board reset done, enabling interrupts. EATA0: reset, interrupts disabled, loops 100469. EATA0: reset, mbox 63 locked, DID_RESET, done. EATA0: reset, exit, done. sd 0:0:6:0: qcomm, mbox 0, adapter busy, will start sd 0:0:6:0: abort, mbox 0. EATA0: abort, timeout error. sd 0:0:6:0: reset, enter. EATA0: reset, exit, timeout error. sd 0:0:6:0 Device offlinled - not ready after error recovery sd 0:0:6:0 rejecting I/O to offline device sd 0:0:6:0 rejecting I/O to offline device sd 0:0:6:0 [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK starting new kernel
As mentioned previously this occurred after the normal Synchronizing SCSI cache messages.
I don't think that there is anything else that gets sent to the console.
Arthur.
| |