Messages in this thread Patch in this message | | | From | Charles Keepax <> | Subject | [PATCH 9/9] extcon: arizona: Don't disable debounce for inverted jacks | Date | Wed, 16 Sep 2015 10:42:21 +0100 |
| |
Whilst the jack is connected we disable the jack detection debounce to ensure as quick as possible a detection of jack removal. However, it is only safe to disable the jack debounce whilst the jack is connected if using the micd clamp or the jack is not inverted. Otherwise spurious interrupts might be generated when we re-enable the debounce.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> --- drivers/extcon/extcon-arizona.c | 8 +++++--- 1 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index 9255c1f..4479781 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -1118,9 +1118,11 @@ static irqreturn_t arizona_jackdet(int irq, void *data) msecs_to_jiffies(HPDET_DEBOUNCE)); } - regmap_update_bits(arizona->regmap, - ARIZONA_JACK_DETECT_DEBOUNCE, - ARIZONA_MICD_CLAMP_DB | ARIZONA_JD1_DB, 0); + if (info->micd_clamp || !arizona->pdata.jd_invert) + regmap_update_bits(arizona->regmap, + ARIZONA_JACK_DETECT_DEBOUNCE, + ARIZONA_MICD_CLAMP_DB | + ARIZONA_JD1_DB, 0); } else { dev_dbg(arizona->dev, "Detected jack removal\n"); -- 1.7.2.5
| |