lkml.org 
[lkml]   [2015]   [Sep]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v7 PATCH 1/2] iio: light: Add support for UPISEMI uS5182d als and proximity sensor
Date
Add support for UPISEMI us5182d als and proximity sensor.
Supports raw readings.
Data sheet for this device can be found here:
http://www.upi-semi.com/temp/uS5182D-DS-P0103-temp.pdf

Signed-off-by: Adriana Reus <adriana.reus@intel.com>
---
No changes since v6
drivers/iio/light/Kconfig | 10 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/us5182d.c | 507 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 518 insertions(+)
create mode 100644 drivers/iio/light/us5182d.c

diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 19b9a17..cfd3df8 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -300,6 +300,16 @@ config TSL4531
To compile this driver as a module, choose M here: the
module will be called tsl4531.

+config US5182D
+ tristate "UPISEMI light and proximity sensor"
+ depends on I2C
+ help
+ If you say yes here you get support for the UPISEMI US5182D
+ ambient light and proximity sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called us5182d.
+
config VCNL4000
tristate "VCNL4000 combined ALS and proximity sensor"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index 7b22445..b2c3105 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -28,4 +28,5 @@ obj-$(CONFIG_STK3310) += stk3310.o
obj-$(CONFIG_TCS3414) += tcs3414.o
obj-$(CONFIG_TCS3472) += tcs3472.o
obj-$(CONFIG_TSL4531) += tsl4531.o
+obj-$(CONFIG_US5182D) += us5182d.o
obj-$(CONFIG_VCNL4000) += vcnl4000.o
diff --git a/drivers/iio/light/us5182d.c b/drivers/iio/light/us5182d.c
new file mode 100644
index 0000000..49dab3c
--- /dev/null
+++ b/drivers/iio/light/us5182d.c
@@ -0,0 +1,507 @@
+/*
+ * Copyright (c) 2015 Intel Corporation
+ *
+ * Driver for UPISEMI us5182d Proximity and Ambient Light Sensor.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * To do: Interrupt support.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/mutex.h>
+
+#define US5182D_REG_CFG0 0x00
+#define US5182D_CFG0_ONESHOT_EN BIT(6)
+#define US5182D_CFG0_SHUTDOWN_EN BIT(7)
+#define US5182D_CFG0_WORD_ENABLE BIT(0)
+
+#define US5182D_REG_CFG1 0x01
+#define US5182D_CFG1_ALS_RES16 BIT(4)
+#define US5182D_CFG1_AGAIN_DEFAULT 0x00
+
+#define US5182D_REG_CFG2 0x02
+#define US5182D_CFG2_PX_RES16 BIT(4)
+#define US5182D_CFG2_PXGAIN_DEFAULT BIT(2)
+
+#define US5182D_REG_CFG3 0x03
+#define US5182D_CFG3_LED_CURRENT100 (BIT(4) | BIT(5))
+
+#define US5182D_REG_CFG4 0x10
+
+/*
+ * Registers for tuning the auto dark current cancelling feature.
+ * DARK_TH(reg 0x27,0x28) - threshold (counts) for auto dark cancelling.
+ * when ALS > DARK_TH --> ALS_Code = ALS - Upper(0x2A) * Dark
+ * when ALS < DARK_TH --> ALS_Code = ALS - Lower(0x29) * Dark
+ */
+#define US5182D_REG_UDARK_TH 0x27
+#define US5182D_REG_DARK_AUTO_EN 0x2b
+#define US5182D_REG_AUTO_LDARK_GAIN 0x29
+#define US5182D_REG_AUTO_HDARK_GAIN 0x2a
+
+#define US5182D_OPMODE_ALS 0x01
+#define US5182D_OPMODE_PX 0x02
+#define US5182D_OPMODE_SHIFT 4
+
+#define US5182D_REG_DARK_AUTO_EN_DEFAULT 0x80
+#define US5182D_REG_AUTO_LDARK_GAIN_DEFAULT 0x16
+#define US5182D_REG_AUTO_HDARK_GAIN_DEFAULT 0x00
+
+#define US5182D_REG_ADL 0x0c
+#define US5182D_REG_PDL 0x0e
+
+#define US5182D_REG_MODE_STORE 0x21
+#define US5182D_STORE_MODE 0x01
+
+#define US5182D_REG_CHIPID 0xb2
+
+#define US5182D_OPMODE_MASK GENMASK(5, 4)
+#define US5182D_AGAIN_MASK 0x07
+#define US5182D_RESET_CHIP 0x01
+
+#define US5182D_CHIPID 0x26
+#define US5182D_DRV_NAME "us5182d"
+
+#define US5182D_GA_RESOLUTION 1000
+
+#define US5182D_READ_BYTE 1
+#define US5182D_READ_WORD 2
+#define US5182D_OPSTORE_SLEEP_TIME 20 /* ms */
+
+/* Available ranges: [12354, 7065, 3998, 2202, 1285, 498, 256, 138] lux */
+static const int us5182d_scales[] = {188500, 107800, 61000, 33600, 19600, 7600,
+ 3900, 2100};
+
+/*
+ * Experimental thresholds that work with US5182D sensor on evaluation board
+ * roughly between 12-32 lux
+ */
+static u16 us5182d_dark_ths_vals[] = {170, 200, 512, 512, 800, 2000, 4000,
+ 8000};
+
+enum mode {
+ US5182D_ALS_PX,
+ US5182D_ALS_ONLY,
+ US5182D_PX_ONLY
+};
+
+struct us5182d_data {
+ struct i2c_client *client;
+ struct mutex lock;
+
+ /* Glass attenuation factor */
+ u32 ga;
+
+ /* Dark gain tuning */
+ u8 lower_dark_gain;
+ u8 upper_dark_gain;
+ u16 *us5182d_dark_ths;
+
+ u8 opmode;
+};
+
+static IIO_CONST_ATTR(in_illuminance_scale_available,
+ "0.0021 0.0039 0.0076 0.0196 0.0336 0.061 0.1078 0.1885");
+
+static struct attribute *us5182d_attrs[] = {
+ &iio_const_attr_in_illuminance_scale_available.dev_attr.attr,
+ NULL
+};
+
+static const struct attribute_group us5182d_attr_group = {
+ .attrs = us5182d_attrs,
+};
+
+static const struct {
+ u8 reg;
+ u8 val;
+} us5182d_regvals[] = {
+ {US5182D_REG_CFG0, (US5182D_CFG0_SHUTDOWN_EN |
+ US5182D_CFG0_WORD_ENABLE)},
+ {US5182D_REG_CFG1, US5182D_CFG1_ALS_RES16},
+ {US5182D_REG_CFG2, (US5182D_CFG2_PX_RES16 |
+ US5182D_CFG2_PXGAIN_DEFAULT)},
+ {US5182D_REG_CFG3, US5182D_CFG3_LED_CURRENT100},
+ {US5182D_REG_MODE_STORE, US5182D_STORE_MODE},
+ {US5182D_REG_CFG4, 0x00},
+};
+
+static const struct iio_chan_spec us5182d_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ },
+ {
+ .type = IIO_PROXIMITY,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ }
+};
+
+static int us5182d_get_als(struct us5182d_data *data)
+{
+ int ret;
+ unsigned long result;
+
+ ret = i2c_smbus_read_word_data(data->client,
+ US5182D_REG_ADL);
+ if (ret < 0)
+ return ret;
+
+ result = ret * data->ga / US5182D_GA_RESOLUTION;
+ if (result > 0xffff)
+ result = 0xffff;
+
+ return result;
+}
+
+static int us5182d_set_opmode(struct us5182d_data *data, u8 mode)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, US5182D_REG_CFG0);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * In oneshot mode the chip will power itself down after taking the
+ * required measurement.
+ */
+ ret = ret | US5182D_CFG0_ONESHOT_EN;
+
+ /* update mode */
+ ret = ret & ~US5182D_OPMODE_MASK;
+ ret = ret | (mode << US5182D_OPMODE_SHIFT);
+
+ /*
+ * After updating the operating mode, the chip requires that
+ * the operation is stored, by writing 1 in the STORE_MODE
+ * register (auto-clearing).
+ */
+ ret = i2c_smbus_write_byte_data(data->client, US5182D_REG_CFG0, ret);
+ if (ret < 0)
+ return ret;
+
+ if (mode == data->opmode)
+ return 0;
+
+ ret = i2c_smbus_write_byte_data(data->client, US5182D_REG_MODE_STORE,
+ US5182D_STORE_MODE);
+ if (ret < 0)
+ return ret;
+
+ data->opmode = mode;
+ msleep(US5182D_OPSTORE_SLEEP_TIME);
+
+ return 0;
+}
+
+static int us5182d_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ struct us5182d_data *data = iio_priv(indio_dev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ switch (chan->type) {
+ case IIO_LIGHT:
+ mutex_lock(&data->lock);
+ ret = us5182d_set_opmode(data, US5182D_OPMODE_ALS);
+ if (ret < 0)
+ goto out_err;
+
+ ret = us5182d_get_als(data);
+ if (ret < 0)
+ goto out_err;
+ mutex_unlock(&data->lock);
+ *val = ret;
+ return IIO_VAL_INT;
+ case IIO_PROXIMITY:
+ mutex_lock(&data->lock);
+ ret = us5182d_set_opmode(data, US5182D_OPMODE_PX);
+ if (ret < 0)
+ goto out_err;
+
+ ret = i2c_smbus_read_word_data(data->client,
+ US5182D_REG_PDL);
+ if (ret < 0)
+ goto out_err;
+ mutex_unlock(&data->lock);
+ *val = ret;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+
+ case IIO_CHAN_INFO_SCALE:
+ ret = i2c_smbus_read_byte_data(data->client, US5182D_REG_CFG1);
+ if (ret < 0)
+ return ret;
+
+ *val = 0;
+ *val2 = us5182d_scales[ret & US5182D_AGAIN_MASK];
+
+ return IIO_VAL_INT_PLUS_MICRO;
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+out_err:
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+/**
+ * us5182d_update_dark_th - update Darh_Th registers
+ * @data us5182d_data structure
+ * @index index in us5182d_dark_ths array to use for the updated value
+ *
+ * Function needs to be called with a lock held because it needs two i2c write
+ * byte operations as these registers (0x27 0x28) don't work in word mode
+ * accessing.
+ */
+static int us5182d_update_dark_th(struct us5182d_data *data, int index)
+{
+ __be16 dark_th = cpu_to_be16(data->us5182d_dark_ths[index]);
+ int ret;
+
+ ret = i2c_smbus_write_byte_data(data->client, US5182D_REG_UDARK_TH,
+ ((u8 *)&dark_th)[0]);
+ if (ret < 0)
+ return ret;
+
+ return i2c_smbus_write_byte_data(data->client, US5182D_REG_UDARK_TH + 1,
+ ((u8 *)&dark_th)[1]);
+}
+
+/**
+ * us5182d_apply_scale - update the ALS scale
+ * @data us5182d_data structure
+ * @index index in us5182d_scales array to use for the updated value
+ *
+ * Function needs to be called with a lock held as we're having more than one
+ * i2c operation.
+ */
+static int us5182d_apply_scale(struct us5182d_data *data, int index)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(data->client, US5182D_REG_CFG1);
+ if (ret < 0)
+ return ret;
+
+ ret = ret & (~US5182D_AGAIN_MASK);
+ ret |= index;
+
+ ret = i2c_smbus_write_byte_data(data->client, US5182D_REG_CFG1, ret);
+ if (ret < 0)
+ return ret;
+
+ return us5182d_update_dark_th(data, index);
+}
+
+static int us5182d_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct us5182d_data *data = iio_priv(indio_dev);
+ int ret, i;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ if (val != 0)
+ return -EINVAL;
+ for (i = 0; i < ARRAY_SIZE(us5182d_scales); i++)
+ if (val2 == us5182d_scales[i]) {
+ mutex_lock(&data->lock);
+ ret = us5182d_apply_scale(data, i);
+ mutex_unlock(&data->lock);
+ return ret;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static const struct iio_info us5182d_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = us5182d_read_raw,
+ .write_raw = us5182d_write_raw,
+ .attrs = &us5182d_attr_group,
+};
+
+static int us5182d_reset(struct iio_dev *indio_dev)
+{
+ struct us5182d_data *data = iio_priv(indio_dev);
+
+ return i2c_smbus_write_byte_data(data->client, US5182D_REG_CFG3,
+ US5182D_RESET_CHIP);
+}
+
+static int us5182d_init(struct iio_dev *indio_dev)
+{
+ struct us5182d_data *data = iio_priv(indio_dev);
+ int i, ret;
+
+ ret = us5182d_reset(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ data->opmode = 0;
+ for (i = 0; i < ARRAY_SIZE(us5182d_regvals); i++) {
+ ret = i2c_smbus_write_byte_data(data->client,
+ us5182d_regvals[i].reg,
+ us5182d_regvals[i].val);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void us5182d_get_platform_data(struct iio_dev *indio_dev)
+{
+ struct us5182d_data *data = iio_priv(indio_dev);
+
+ if (device_property_read_u32(&data->client->dev, "upisemi,glass-coef",
+ &data->ga))
+ data->ga = US5182D_GA_RESOLUTION;
+ if (device_property_read_u16_array(&data->client->dev,
+ "upisemi,dark-ths",
+ data->us5182d_dark_ths,
+ ARRAY_SIZE(us5182d_dark_ths_vals)))
+ data->us5182d_dark_ths = us5182d_dark_ths_vals;
+ if (device_property_read_u8(&data->client->dev,
+ "upisemi,upper-dark-gain",
+ &data->upper_dark_gain))
+ data->upper_dark_gain = US5182D_REG_AUTO_HDARK_GAIN_DEFAULT;
+ if (device_property_read_u8(&data->client->dev,
+ "upisemi,lower-dark-gain",
+ &data->lower_dark_gain))
+ data->lower_dark_gain = US5182D_REG_AUTO_LDARK_GAIN_DEFAULT;
+}
+
+static int us5182d_dark_gain_config(struct iio_dev *indio_dev)
+{
+ struct us5182d_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = us5182d_update_dark_th(data, US5182D_CFG1_AGAIN_DEFAULT);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(data->client,
+ US5182D_REG_AUTO_LDARK_GAIN,
+ data->lower_dark_gain);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_smbus_write_byte_data(data->client,
+ US5182D_REG_AUTO_HDARK_GAIN,
+ data->upper_dark_gain);
+ if (ret < 0)
+ return ret;
+
+ return i2c_smbus_write_byte_data(data->client, US5182D_REG_DARK_AUTO_EN,
+ US5182D_REG_DARK_AUTO_EN_DEFAULT);
+}
+
+static int us5182d_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct us5182d_data *data;
+ struct iio_dev *indio_dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ i2c_set_clientdata(client, indio_dev);
+ data->client = client;
+
+ mutex_init(&data->lock);
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->info = &us5182d_info;
+ indio_dev->name = US5182D_DRV_NAME;
+ indio_dev->channels = us5182d_channels;
+ indio_dev->num_channels = ARRAY_SIZE(us5182d_channels);
+ indio_dev->modes = INDIO_DIRECT_MODE;
+
+ ret = i2c_smbus_read_byte_data(data->client, US5182D_REG_CHIPID);
+ if (ret != US5182D_CHIPID) {
+ dev_err(&data->client->dev,
+ "Failed to detect US5182 light chip\n");
+ return (ret < 0) ? ret : -ENODEV;
+ }
+
+ us5182d_get_platform_data(indio_dev);
+ ret = us5182d_init(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ ret = us5182d_dark_gain_config(indio_dev);
+ if (ret < 0)
+ return ret;
+
+ return iio_device_register(indio_dev);
+}
+
+static int us5182d_remove(struct i2c_client *client)
+{
+ iio_device_unregister(i2c_get_clientdata(client));
+ return i2c_smbus_write_byte_data(client, US5182D_REG_CFG0,
+ US5182D_CFG0_SHUTDOWN_EN);
+}
+
+static const struct acpi_device_id us5182d_acpi_match[] = {
+ { "USD5182", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(acpi, us5182d_acpi_match);
+
+static const struct i2c_device_id us5182d_id[] = {
+ {"usd5182", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, us5182d_id);
+
+static struct i2c_driver us5182d_driver = {
+ .driver = {
+ .name = US5182D_DRV_NAME,
+ .acpi_match_table = ACPI_PTR(us5182d_acpi_match),
+ },
+ .probe = us5182d_probe,
+ .remove = us5182d_remove,
+ .id_table = us5182d_id,
+
+};
+module_i2c_driver(us5182d_driver);
+
+MODULE_AUTHOR("Adriana Reus <adriana.reus@intel.com>");
+MODULE_DESCRIPTION("Driver for us5182d Proximity and Light Sensor");
+MODULE_LICENSE("GPL v2");
--
1.9.1


\
 
 \ /
  Last update: 2015-09-16 10:41    [W:0.067 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site