lkml.org 
[lkml]   [2015]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] ARM: dts: Fix LEDs on exynos5422-odroidxu3
From
Date
On 16.09.2015 08:35, Kukjin Kim wrote:
> On 09/13/15 18:32, Krzysztof Kozlowski wrote:
>> The LEDs on Odroid XU3 family boards could not properly probe because PWM
>> outputs were reduced only to PWM for fan. Fix it for Odroid XU3 and
>> XU3-Lite boards by switching to usage of all 4 outputs (although the PWM
>> for MIPI probably is redundant because board does not have MIPI
>> connector available).
>>
>> This fixes warnings on dmesg:
>> [ 4.838712] samsung-pwm 12dd0000.pwm: tried to request PWM channel 1 without output
>> [ 4.838725] leds_pwm pwmleds: unable to request PWM for green:mmc0: -22
>> [ 4.838767] leds_pwm: probe of pwmleds failed with error -22
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
>>
>> ---
>>
>> Changes since v1:
>> 1. Do not rebase on patchset adding support for Odroid XU4 board. Rebase
>> just on current next.
>> ---
>
> Applied, thanks.
>

Thanks. This is actually a candidate for current v4.3 cycle. It fixes
issue with LEDs for Odroid XU3 caused by Anand's b685d540cc26:
The offending commit b685d540cc26 was merged in v4.3.
I forgot to add "fixes" tag.
Fixes: b685d540cc26 ("ARM: dts: Add pwm-fan node for exynos5422-odroidxu3")

Can you send it to arm-soc during this cycle?

For current v4.3 Bartlomiej's patch is also an important candidate:
"ARM: dts: add suspend opp to exynos4412"

Best regards,
Krzysztof


\
 
 \ /
  Last update: 2015-09-16 02:21    [W:0.050 / U:0.684 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site