lkml.org 
[lkml]   [2015]   [Sep]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v4 5/5] arm64: dts: Add sensor node to Juno dt
    Date
    The SCP firmware on Juno provides access to SoC sensors via the
    SCPI. Add the sensor nodes to the device tree to enable this support.

    Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
    Cc: Rob Herring <robh+dt@kernel.org>
    Cc: Mark Rutland <mark.rutland@arm.com>
    Cc: Liviu Dudau <liviu.dudau@arm.com>
    Cc: Sudeep Holla <sudeep.holla@arm.com>
    ---
    arch/arm64/boot/dts/arm/juno-base.dtsi | 5 +++++
    1 file changed, 5 insertions(+)

    diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
    index c624208..dd5158e 100644
    --- a/arch/arm64/boot/dts/arm/juno-base.dtsi
    +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi
    @@ -96,6 +96,11 @@
    clock-output-names = "pxlclk0", "pxlclk1";
    };
    };
    +
    + scpi_sensors0: sensors {
    + compatible = "arm,scpi-sensors";
    + #thermal-sensor-cells = <1>;
    + };
    };

    /include/ "juno-clocks.dtsi"
    --
    2.5.1


    \
     
     \ /
      Last update: 2015-09-15 19:21    [W:3.765 / U:0.052 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site