lkml.org 
[lkml]   [2015]   [Sep]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [4.3-rc1 regression] modular 8250 doesn't load
Greg Kroah-Hartman writes:
> On Mon, Sep 14, 2015 at 07:08:10PM +0200, Mikael Pettersson wrote:
> > I have CONFIG_SERIAL_8250=m. With 4.2 '/sbin/modprobe 8250' worked
> > and resulted in:
> >
> > [ 41.354550] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
> > [ 41.375156] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
> >
> > With 4.3-rc1 however the command fails and logs the following:
> >
> > [ 34.140300] 8250_base: module license 'unspecified' taints kernel.
>
> Oops, need to fix that.
>
> > [ 34.141846] Disabling lock debugging due to kernel taint
> > [ 34.143388] 8250_base: Unknown symbol uart_insert_char (err 0)
> > [ 34.144908] 8250_base: Unknown symbol uart_handle_dcd_change (err 0)
> > [ 34.146439] 8250_base: Unknown symbol __pm_runtime_resume (err 0)
> > [ 34.147901] 8250_base: Unknown symbol tty_termios_encode_baud_rate (err 0)
> > [ 34.149354] 8250_base: Unknown symbol uart_handle_cts_change (err 0)
> > [ 34.150798] 8250_base: Unknown symbol __pm_runtime_suspend (err 0)
> > [ 34.152240] 8250_base: Unknown symbol nr_irqs (err 0)
>
> Are you sure you did 'modprobe' and not 'insmod'?

Yes, I used modprobe. I double-checked.

> Peter, care to send a module license fix for this new module you
> created?

/Mikael


\
 
 \ /
  Last update: 2015-09-14 20:21    [W:0.793 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site