Messages in this thread | | | From | Heiko Stübner <> | Subject | Re: [PATCH] ARM: dts: Add the hdmi-ddc pinctrl settings for rk3288 | Date | Sun, 13 Sep 2015 13:32:34 +0200 |
| |
Am Mittwoch, 2. September 2015, 14:54:22 schrieb Douglas Anderson: > The pins for i2c5 can either be configured as "I2C5" which means that > they're controlled by the normal RK3288 I2C controller or as "EDP / HDMI > I2C". It's unclear why EDP is referenced here since apparently setting > the mux to this position enables I2C communication using the dw_hdmi > block with a patch like <https://patchwork.kernel.org/patch/7098101/>. > > There appear to be some reasons why using the builtin I2C controller in > dw_hdmi is better than using the normal RK3288 I2C controller, so boards > based on rk3288 might eventually want to use this pinmux if it's known > to work. > > Once driver support in dw_hdmi lands, boards would use this by selecting > this pinctrl for the HDMI block and then _not_ specifying a ddc-i2c-bus > and _not_ setting the status to "okay" for i2c5 (which uses the same > pins). > > Signed-off-by: Douglas Anderson <dianders@chromium.org>
applied to my dts branch for 4.4
Thanks Heiko
| |