lkml.org 
[lkml]   [2015]   [Sep]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/6] extcon: arizona: Ignore jd_invert for MICD_CLAMP_STS
On 2015년 09월 10일 20:41, Charles Keepax wrote:
> From: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
>
> The polarity of MICD_CLAMP_STS does not change when different clamp
> modes are used, this patch corrects this issue.
>
> Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com>
> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
> ---
> drivers/extcon/extcon-arizona.c | 5 +----
> 1 files changed, 1 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
> index 7bfaacd..6d030a0 100644
> --- a/drivers/extcon/extcon-arizona.c
> +++ b/drivers/extcon/extcon-arizona.c
> @@ -1059,10 +1059,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
>
> if (arizona->pdata.jd_gpio5) {
> mask = ARIZONA_MICD_CLAMP_STS;
> - if (arizona->pdata.jd_invert)
> - present = ARIZONA_MICD_CLAMP_STS;
> - else
> - present = 0;
> + present = 0;
> } else {
> mask = ARIZONA_JD1_STS;
> if (arizona->pdata.jd_invert)
>

Acked-by: Chanwoo Choi <cw00.choi@samsung.com>

Thanks,
Chanwoo Choi


\
 
 \ /
  Last update: 2015-09-11 10:21    [W:0.115 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site