Messages in this thread | | | Subject | Re: [PATCH 2/3] clk: bcm2835: Add a driver for the auxiliary peripheral clock gates. | From | Martin Sperl <> | Date | Fri, 11 Sep 2015 12:24:50 +0200 |
| |
> On 11.09.2015, at 00:22, Eric Anholt <eric@anholt.net> wrote: > > There are a pair of SPI masters and a mini UART that were last minute > additions. As a result, they didn't get integrated in the same way as > the other gates off of the VPU clock in CPRMAN. > > Signed-off-by: Eric Anholt <eric@anholt.net> > ---
Tested with the spi-bcm2835aux driver and it works perfectly. I will now post the latest incarnation of the driver for inclusion.
I have also tested with the uart1 and it works in principle.
Note that there is one issue (as mentioned elsewhere) with uart1: the 8250 serial driver has a (hardcoded) internal clock divider 16, while the hardware has an internal divider of 8.
This results in baud rates that are a factor of 2 higher than requested.
Tested-by: Martin Sperl <kernel@martin.sperl.org>
| |