lkml.org 
[lkml]   [2015]   [Sep]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V3 0/4] PCI: ACPI: Setting up DMA coherency for PCI device from _CCA attribute
On 08/26/2015 09:54 PM, Suravee Suthikulpanit wrote:
> This patch adds support to setup DMA coherency for PCI device using
> the ACPI _CCA attribute. According to the ACPI spec, the _CCA attribute
> is required for ARM64. Therefore, this patch is a pre-req for ACPI PCI
> support for ARM64 which is currently in development.
>
> Also, this should not affect other architectures that does not define
> CONFIG_ACPI_CCA_REQUIRED, since the default value is coherent.
>
> I have included the following patch from Jeremy before cleaning up
> the acpi_check_dma() function (in patch 2).
>
> http://www.spinics.net/lists/linux-usb/msg128582.html)
>
> Changes from V2: (https://lkml.org/lkml/2015/8/25/549)
> * Return -ENOSUPP instead of -1 (per Rafael's suggestion)
> * Add WARN() when fail to setup DMA for PCI device when booting
> ACPI (per Arnd's suggestion)
> * Added Acked-by from Rob.
> * Minor clean up
>
> Changes from V1: (https://lkml.org/lkml/2015/8/13/182)
> * Include patch 1 from Jeremy to enable support for _CCA=0
> * Clean up acpi_check_dma() per Bjorn suggestions
> * Split the original V1 patch into two patches (patch 3 and 4)
>
>
> Jeremy Linton (1):
> Honor ACPI _CCA attribute setting
>
> Suravee Suthikulpanit (3):
> ACPI/scan: Clean up acpi_check_dma
> PCI: OF: Move of_pci_dma_configure() to pci_dma_configure()
> PCI: ACPI: Add support for PCI device DMA coherency

For this series,

Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>

Thanks
Hanjun


\
 
 \ /
  Last update: 2015-09-10 11:41    [W:0.257 / U:0.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site