lkml.org 
[lkml]   [2015]   [Aug]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v4 0/9]
From
Date
在 2015/8/6 15:08, Jaehoon Chung 写道:
> Hi, Shawn.
>
> I remembered that Krzysztof has mentioned "Fix the title of cover letter."
> Your cover letter's title is nothing.. "[RFC PATCH v4 0/9] " ??
> [RFC PATCH v4 0/9] your title...
Sorry, I forgot it, and will fix in next version...

> Best Regards,
> Jaehoon Chung
>
> On 08/06/2015 03:44 PM, Shawn Lin wrote:
>> Add external dma support for Synopsys MSHC
>>
>> Synopsys DesignWare mobile storage host controller supports three
>> types of transfer mode: pio, internal dma and external dma. However,
>> dw_mmc can only supports pio and internal dma now. Thus some platforms
>> using dw-mshc integrated with generic dma can't work in dma mode. So we
>> submit this patch to achieve it.
>>
>> And the config option, CONFIG_MMC_DW_IDMAC, was added by Will Newton
>> (commit:f95f3850) for the first version of dw_mmc and never be touched since
>> then. At that time dt-bindings hadn't been introduced into dw_mmc yet means
>> we should select CONFIG_MMC_DW_IDMAC to enable internal dma mode at compile
>> time. Nowadays, device-tree helps us to support a variety of boards with one
>> kernel. That's why we need to remove it and decide the transfer mode by reading
>> dw_mmc's HCON reg at runtime.
>>
>> This RFC patch needs lots of ACKs. I know it's hard, but it does need someone
>> to make the running.
>>
>> Patch does the following things:
>> - remove CONFIG_MMC_DW_IDMAC config option
>> - add bindings for edmac used by synopsys-dw-mshc
>> at runtime
>> - add edmac support for synopsys-dw-mshc
>>
>> Patch is based on next of git://git.linaro.org/people/ulf.hansson/mmc
>>
>>
>> Changes in v4:
>> - remove "host->trans_mode" and use "host->use_dma" to indicate
>> transfer mode.
>> - remove all bt-bindings' changes since we don't need new properities.
>> - check transfer mode at runtime by reading HCON reg
>> - spilt defconfig changes for each sub-architecture
>> - fix the title of cover letter
>> - reuse some code for reducing code size
>>
>> Changes in v3:
>> - choose transfer mode at runtime
>> - remove all CONFIG_MMC_DW_IDMAC config option
>> - add supports-idmac property for some platforms
>>
>> Changes in v2:
>> - Fix typo of dev_info msg
>> - remove unused dmach from declaration of dw_mci_dma_slave
>>
>> Shawn Lin (9):
>> mmc: dw_mmc: Add external dma interface support
>> Documentation: synopsys-dw-mshc: add bindings for idmac and edmac
>> mips: pistachio_defconfig: remove CONFIG_MMC_DW_IDMAC
>> arc: axs10x_defconfig: remove CONFIG_MMC_DW_IDMAC
>> arm: exynos_defconfig: remove CONFIG_MMC_DW_IDMAC
>> arm: hisi_defconfig: remove CONFIG_MMC_DW_IDMAC
>> arm: lpc18xx_defconfig: remove CONFIG_MMC_DW_IDMAC
>> arm: multi_v7_defconfig: remove CONFIG_MMC_DW_IDMAC
>> arm: zx_defconfig: remove CONFIG_MMC_DW_IDMAC
>>
>> .../devicetree/bindings/mmc/synopsys-dw-mshc.txt | 25 ++
>> arch/arc/configs/axs101_defconfig | 1 -
>> arch/arc/configs/axs103_defconfig | 1 -
>> arch/arc/configs/axs103_smp_defconfig | 1 -
>> arch/arm/configs/exynos_defconfig | 1 -
>> arch/arm/configs/hisi_defconfig | 1 -
>> arch/arm/configs/lpc18xx_defconfig | 1 -
>> arch/arm/configs/multi_v7_defconfig | 1 -
>> arch/arm/configs/zx_defconfig | 1 -
>> arch/mips/configs/pistachio_defconfig | 1 -
>> drivers/mmc/host/Kconfig | 11 +-
>> drivers/mmc/host/dw_mmc-pltfm.c | 2 +
>> drivers/mmc/host/dw_mmc.c | 258 +++++++++++++++++----
>> include/linux/mmc/dw_mmc.h | 27 ++-
>> 14 files changed, 257 insertions(+), 75 deletions(-)
>>
>
>
>


--
Shawn Lin




\
 
 \ /
  Last update: 2015-08-06 09:41    [W:1.355 / U:1.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site