Messages in this thread | | | Date | Thu, 27 Aug 2015 11:45:49 +0200 | From | Johan Hovold <> | Subject | Re: Likely issue with ch341 kernel-module/driver |
| |
On Thu, Aug 27, 2015 at 01:57:01PM +0530, Ajay Garg wrote: > Hi John. > > On Thu, Aug 27, 2015 at 1:07 PM, Johan Hovold <johan@kernel.org> wrote: > > > > Try to see if you can get the device to work reliably with some other > > driver (vendor driver or other OS) to rule out a broken device. > > > > I tested the serial-usb adapter using a loopback-hardware-tool > (confirmed to be perfect). > > Using this, I see what I type, echo it back, and see what I receive. > > The putty session-settings are standard one - 9600, 8N-1, no parity. > > The byte flow is > putty-on-laptop => usb-interface => serial-interface => loopback => > serial-interface => usb-interface => putty-on-laptop. > > Thereafter, following are the echo-sequences I see :: > > a ==> 0 > b ==> ' > c ==> N > > This (I guess) confirms a problem on (at least) the driver-side.
Not unless you confirm that the same setup works when using a different driver, right? Otherwise, it could still be a hw issue.
Johan
| |