lkml.org 
[lkml]   [2015]   [Aug]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] DRM - radeon: Don't link train DisplayPort on HPD until we get the dpcd
Date
> -----Original Message-----
> From: Jerome Glisse [mailto:j.glisse@gmail.com]
> Sent: Monday, August 24, 2015 9:48 AM
> To: cpaul@redhat.com
> Cc: Deucher, Alexander; Koenig, Christian; David Airlie; dri-
> devel@lists.freedesktop.org; linux-kernel@vger.kernel.org; Jerome Glisse;
> Benjamin Tissoires; stable@vger.kernel.org
> Subject: Re: [PATCH] DRM - radeon: Don't link train DisplayPort on HPD until
> we get the dpcd
>
> On Fri, Aug 21, 2015 at 02:16:12PM -0400, cpaul@redhat.com wrote:
> > From: Stephen Chandler Paul <cpaul@redhat.com>
> >
> > Most of the time this isn't an issue since hotplugging an adaptor will
> > trigger a crtc mode change which in turn, causes the driver to probe
> > every DisplayPort for a dpcd. However, in cases where hotplugging
> > doesn't cause a mode change (specifically when one unplugs a monitor
> > from a DisplayPort connector, then plugs that same monitor back in
> > seconds later on the same port without any other monitors connected), we
> > never probe for the dpcd before starting the initial link training. What
> > happens from there looks like this:
> >
> > - GPU has only one monitor connected. It's connected via
> > DisplayPort, and does not go through an adaptor of any sort.
> >
> > - User unplugs DisplayPort connector from GPU.
> >
> > - Change in HPD is detected by the driver, we probe every
> > DisplayPort for a possible connection.
> >
> > - Probe the port the user originally had the monitor connected
> > on for it's dpcd. This fails, and we clear the first (and only
> > the first) byte of the dpcd to indicate we no longer have a
> > dpcd for this port.
> >
> > - User plugs the previously disconnected monitor back into the
> > same DisplayPort.
> >
> > - radeon_connector_hotplug() is called before everyone else,
> > and tries to handle the link training. Since only the first
> > byte of the dpcd is zeroed, the driver is able to complete
> > link training but does so against the wrong dpcd, causing it
> > to initialize the link with the wrong settings.
> >
> > - Display stays blank (usually), dpcd is probed after the
> > initial link training, and the driver prints no obvious
> > messages to the log.
> >
> > In theory, since only one byte of the dpcd is chopped off (specifically,
> > the byte that contains the revision information for DisplayPort), it's
> > not entirely impossible that this bug may not show on certain monitors.
> > For instance, the only reason this bug was visible on my ASUS PB238
> > monitor was due to the fact that this monitor using the enhanced framing
> > symbol sequence, the flag for which is ignored if the radeon driver
> > thinks that the DisplayPort version is below 1.1.
> >
> > Signed-off-by: Stephen Chandler Paul <cpaul@redhat.com>
> > Reviewed-by: Jerome Glisse <jglisse@redhat.com>
>
> This should be added to stable
>
> cc: <stable@vger.kernel.org>
>

I already added that when I pulled it into my tree :)

Thanks,

Alex

>
>
> > ---
> > drivers/gpu/drm/radeon/radeon_connectors.c | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c
> b/drivers/gpu/drm/radeon/radeon_connectors.c
> > index 94b21ae..5a2cafb 100644
> > --- a/drivers/gpu/drm/radeon/radeon_connectors.c
> > +++ b/drivers/gpu/drm/radeon/radeon_connectors.c
> > @@ -95,6 +95,11 @@ void radeon_connector_hotplug(struct
> drm_connector *connector)
> > if (!radeon_hpd_sense(rdev, radeon_connector-
> >hpd.hpd)) {
> > drm_helper_connector_dpms(connector,
> DRM_MODE_DPMS_OFF);
> > } else if
> (radeon_dp_needs_link_train(radeon_connector)) {
> > + /* Don't try to start link training before we
> > + * have the dpcd */
> > + if (!radeon_dp_getdpcd(radeon_connector))
> > + return;
> > +
> > /* set it to OFF so that
> drm_helper_connector_dpms()
> > * won't return immediately since the current
> state
> > * is ON at this point.
> > --
> > 2.4.3


\
 
 \ /
  Last update: 2015-08-24 16:21    [W:0.051 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site