lkml.org 
[lkml]   [2015]   [Aug]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4/6] ethernet/netxen: advertise LRO support in vlan_features
    Date
    Without this, the presence of a netxen device in a bond will not trigger
    LRO support to be enabled at the bond level, even while it is enabled on
    the slave itself.

    This change becomes necessary when NETIF_F_LRO is added to
    netdev_features.h's NETIF_F_ONE_FOR_ALL.

    CC: Manish Chopra <manish.chopra@qlogic.com>
    CC: Sony Chacko <sony.chacko@qlogic.com>
    CC: Rajesh Borundia <rajesh.borundia@qlogic.com>
    CC: netdev@vger.kernel.org
    Signed-off-by: Jarod Wilson <jarod@redhat.com>
    ---
    drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c | 4 +++-
    1 file changed, 3 insertions(+), 1 deletion(-)

    diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
    index 6409a06..0fd5ada54 100644
    --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
    +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
    @@ -1387,8 +1387,10 @@ netxen_setup_netdev(struct netxen_adapter *adapter,
    if (adapter->capabilities & NX_FW_CAPABILITY_FVLANTX)
    netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_TX;

    - if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO)
    + if (adapter->capabilities & NX_FW_CAPABILITY_HW_LRO) {
    netdev->hw_features |= NETIF_F_LRO;
    + netdev->vlan_features |= NETIF_F_LRO;
    + }

    netdev->features |= netdev->hw_features;

    --
    1.8.3.1


    \
     
     \ /
      Last update: 2015-08-13 20:21    [W:4.942 / U:0.148 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site