lkml.org 
[lkml]   [2015]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/5] ARM: dts: am4372: Add named interrupt property for dwc3
Date
From: Felipe Balbi <balbi@ti.com>

Add interrupt names so that the same can be used for OTG easily.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/am4372.dtsi | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index c80a3e2..3f68b27 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -859,7 +859,12 @@
usb1: usb@48390000 {
compatible = "synopsys,dwc3";
reg = <0x48390000 0x10000>;
- interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
phys = <&usb2_phy1>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
@@ -883,7 +888,12 @@
usb2: usb@483d0000 {
compatible = "synopsys,dwc3";
reg = <0x483d0000 0x10000>;
- interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "peripheral",
+ "host",
+ "otg";
phys = <&usb2_phy2>;
phy-names = "usb2-phy";
maximum-speed = "high-speed";
--
2.1.4


\
 
 \ /
  Last update: 2015-07-08 13:01    [W:0.070 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site