lkml.org 
[lkml]   [2015]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/8] driver-core: add asynchronous probing support for drivers
On Wed, Jul 08, 2015 at 05:43:23PM -0700, Dan Williams wrote:
> On Mon, Jul 6, 2015 at 4:38 PM, Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
> > On Sat, Jul 04, 2015 at 07:09:19AM -0700, Dan Williams wrote:
> >> The problem I ran into was needing to remove devices that still had
> >> yet to be probed and not being able to use registration completion vs
> >> the device_lock() to effectively synchronize the sub-system.
> >
> > Why do you need to "synchronize the sub-system"? The asynchronous
> > probing should be transparent to the driver. Just unregister the device
> > (or the driver) and driver core will ensure that probe() is not in
> > flight.
>
> Async registration is indeed transparent to the driver. The primary
> need to "flush registration" is the case of "region" devices that
> reference a set of NVDIMM devices. A region device requires all
> related NVDIMMs to be active before the region can be enabled.

Sounds like you need to call into the subsystem to let it know that the
device is active and activate region devices when they are ready. Could
be either explicit call or you can try using bus notifiers for
bind/unbind events.

BTW, do you handle bind/unbind via sysfs (everyone forgets about this
mechanism)?

Thanks.

--
Dmitry


\
 
 \ /
  Last update: 2015-07-09 03:01    [W:0.046 / U:0.868 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site