Messages in this thread Patch in this message | | | From | Cory Tusar <> | Subject | [PATCH 1/1] ARM: dts: vfxxx: Include support for esdhc0 functionality. | Date | Wed, 8 Jul 2015 16:51:06 -0400 |
| |
Extend the existing Vybrid eSDHC devicetree implementation to also describe the esdhc0 functional block.
Tested on a custom VF610-based board with a Toshiba THGBM1G5D2EBAI7 eMMC module attached to esdhc0.
Signed-off-by: Cory Tusar <cory.tusar@pid1solutions.com> --- arch/arm/boot/dts/vfxxx.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 4aa3351..7e97017 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -445,6 +445,17 @@ status = "disabled"; }; + esdhc0: esdhc@400b1000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x400b1000 0x1000>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_IPG_BUS>, + <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_ESDHC0>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + esdhc1: esdhc@400b2000 { compatible = "fsl,imx53-esdhc"; reg = <0x400b2000 0x1000>; -- 2.3.6
| |