lkml.org 
[lkml]   [2015]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/2] ARM: dra7: fix DCAN glitch
Date
Hi,

If "default" pins are active for CAN then there is a slight
window during boot when CAN pins are in active mode and can
affect DRA7 CAN stability. This is because device core
automatically selects "default" before probe.

These patches change "default" pins to inactive and adds
a new "active" pin state so that we don't encounter
the glitch mentioned above.

cheers,
-roger

J.D. Schroeder (1):
net: can: c_can: Fix default pinmux glitch at init

Roger Quadros (1):
ARM: dts: dra7x-evm: Prevent glitch on DCAN1 pinmux

arch/arm/boot/dts/dra7-evm.dts | 5 +++--
arch/arm/boot/dts/dra72-evm.dts | 5 +++--
drivers/net/can/c_can/c_can.c | 13 ++++++++++++-
3 files changed, 18 insertions(+), 5 deletions(-)

--
2.1.4



\
 
 \ /
  Last update: 2015-07-07 16:41    [W:0.114 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site