lkml.org 
[lkml]   [2015]   [Jul]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/2] ARM: dts: dra7x-evm: Prevent glitch on DCAN1 pinmux
Date
Driver core sets "default" pinmux on on probe and CAN driver
sets "sleep" pinmux during register. This causes a small window
where the CAN pins are in "default" state with the DCAN module
being disabled.

Change the "default" state to be like sleep so this glitch is
avoided. Add a new "active" state that is used by the driver
when CAN is actually active.

Signed-off-by: Roger Quadros <rogerq@ti.com>
---
arch/arm/boot/dts/dra7-evm.dts | 5 +++--
arch/arm/boot/dts/dra72-evm.dts | 5 +++--
2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index aa46590..096f68b 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -686,7 +686,8 @@

&dcan1 {
status = "ok";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&dcan1_pins_default>;
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 4e1b605..8037384 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -587,9 +587,10 @@

&dcan1 {
status = "ok";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&dcan1_pins_default>;
+ pinctrl-names = "default", "sleep", "active";
+ pinctrl-0 = <&dcan1_pins_sleep>;
pinctrl-1 = <&dcan1_pins_sleep>;
+ pinctrl-2 = <&dcan1_pins_default>;
};

&qspi {
--
2.1.4


\
 
 \ /
  Last update: 2015-07-07 16:41    [W:0.137 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site