lkml.org 
[lkml]   [2015]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 3/8] clk: add support for clocks provided by SCP(System Control Processor)
On 07/03/2015 07:52 AM, Sudeep Holla wrote:
> Hi Stephen,
>
>
> Thanks for the review.
>
> On 02/07/15 18:23, Stephen Boyd wrote:
>> On 06/08, Sudeep Holla wrote:
>>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>>> index 9897f353bf1a..0fe8daefc105 100644
>>> --- a/drivers/clk/Kconfig
>>> +++ b/drivers/clk/Kconfig
>>> @@ -59,6 +59,16 @@ config COMMON_CLK_RK808
>>> clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
>>> by control register.
>>>
>>> +config COMMON_CLK_SCPI
>>> + tristate "Clock driver controlled via SCPI interface"
>>> + depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
>>> + ---help---
>>> + This driver provides support for clocks that are controlled
>>> + by firmware that implements the SCPI interface.
>>> +
>>> + This driver uses SCPI Message Protocol to interact with the
>>> + firmware providing all the clock controls.
>>
>> The tabbing is weird here. Both paragraphs should have the same
>> alignment.
>>
>
> Indeed, sorry for that, fixed now.
>
>>> diff --git a/drivers/clk/clk-scpi.c b/drivers/clk/clk-scpi.c
>>> new file mode 100644
>>> index 000000000000..707b3430c55f
>>> --- /dev/null
>>> +++ b/drivers/clk/clk-scpi.c
>>> +
>>> +#include <linux/clk-provider.h>
>>> +#include <linux/device.h>
>>> +#include <linux/err.h>
>>> +#include <linux/of.h>
>>> +#include <linux/module.h>
>>> +#include <linux/of_platform.h>
>>> +#include <linux/scpi_protocol.h>
>>
>> Please include <linux/platform_device.h> as well.
>>
>
> Added now, didn't bother as of_platform.h includes it.
>
>>> +
>>> +struct scpi_clk {
>>> + u32 id;
>>> + const char *name;
>>
>> Do you need this? Or can you just use __clk_get_name() in places
>> where the name is used?
>>
>
> Not used, so removed it.
>
>
> [...]
>
>>> +static long scpi_clk_round_rate(struct clk_hw *hw, unsigned long rate,
>>> + unsigned long *parent_rate)
>>> +{
>>
>> Maybe a comment here like:
>>
>> /*
>> * We can't figure out what rate it will be, so just return the rate
>> * back to the caller. scpi_clk_recalc_rate() will be called
>> * after the rate is set and we'll know what rate the clock is
>> * running at then.
>> */
>>
>
> Done
>
>>> + return rate;
>>> +}
>>> +
>>> +static int scpi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
>>> + unsigned long parent_rate)
>>> +{
>>> + struct scpi_clk *clk = to_scpi_clk(hw);
>>> +
>>> + return clk->scpi_ops->clk_set_val(clk->id, rate);
>>> +}
>>> +
>>> +static void scpi_clk_disable(struct clk_hw *hw)
>>> +{
>>> + scpi_clk_set_rate(hw, 0, 0);
>>
>> Does this mean you have to set a rate to enable the clock? Are
>> you relying on drivers to call clk_set_rate() to implicitly
>> enable the clock? If so, it would be better to cache the rate of
>> the clock in set_rate if the clock isn't enabled in software and
>> then send the cached rate during enable.
>>
>
> Agreed, I have asked the firmware/SCPI specification guys about
> more details on what to expect from firmware. Once they get back,
> will update the code considering your feedback.
>
> [...]
>
>>> +static int __scpi_find_dvfs_index(struct scpi_clk *clk, unsigned
>>> long rate)
>>> +{
>>> + int idx, max_opp = clk->info->count;
>>> + struct scpi_opp *opp = clk->info->opps;
>>
>> const?
>>
>
> All the 3 above fixed now.
>
> [...]
>
>>> +
>>> + clk = devm_clk_register(dev, &sclk->hw);
>>> + if (!IS_ERR(clk) && max)
>>> + clk_set_rate_range(clk, min, max);
>>
>> Hm.. we're planning to make clk_register() return a struct
>> clk_hw, so this will block that. We need some sort of clk_hw API
>> that allows us to setup min/max limits on the clock from the
>> provider side. Care to add that?
>>
>
> Can you provide pointer to the patches or the tree containing those
> changes ? Are they targeted for v4.3 ?
>

If I have time I may try to start doing the clk_register() conversion,
but it will take a while so I doubt it will be in v4.3. I'm asking if
you can add a clk_hw based API that does something like
clk_set_rate_range() without requiring a struct clk pointer. i.e.
clk_hw_set_rate_range(struct clk_hw *hw, min, max) that constraints the
min/max rate of the clock. This way, the driver is only using clk
provider APIs and not clk consumer APIs.

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project



\
 
 \ /
  Last update: 2015-07-06 22:21    [W:0.444 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site