lkml.org 
[lkml]   [2015]   [Jul]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/2] dmaengine: ti-dma-crossbar: Support for eDMA
On Fri, Jul 03, 2015 at 05:10:46PM +0300, Peter Ujfalusi wrote:
> On 07/02/2015 06:56 PM, Vinod Koul wrote:
> > On Wed, Jul 01, 2015 at 03:41:26PM +0300, Peter Ujfalusi wrote:
> >> Hi,
> >>
> >> On 06/08/2015 04:22 PM, Peter Ujfalusi wrote:
> >>> Hi,
> >>>
> >>> Changes since v01:
> >>> - Drop change in compatible for the crossbar driver and do the configuration
> >>> based on the DT structure.
> >>>
> >>> The ti-dma-crossbar driver in it's current form can work when it is used with
> >>> sDMA (omap-dma). On DRA7x class of devices we have both sDMA and eDMA available.
> >>> The sDMA driver expects to get the DMA request line with offset 1. The eDMA
> >>> stack does not need the offset.
> >>> The crosbbar itself is identical for sDMA and eDMA.
> >>> At probe time the driver will do a match to figure out which dma engine it is
> >>> connected to and based on that information it will configure the offset needed
> >>> by the DMA driver.
> >>
> >> Gentle ping, it has been almost a month ago this series has been sent.
> > Sorry I seem to have missed this series. I relooked at this and it looks
> > fine. I will apply it once rc1 is out. If it needs rebase please resend
>
> No problem,
> the patch still applies cleanly.
No luck, I tried on -rc1 an 1st fails, can you please rebase and resend

--
~Vinod



\
 
 \ /
  Last update: 2015-07-06 15:21    [W:0.096 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site