lkml.org 
[lkml]   [2015]   [Jul]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/9] iio: mma8452: add freefall / motion interrupt source
On 05/07/15 12:44, Jonathan Cameron wrote:
> On 04/07/15 14:55, Martin Kepplinger wrote:
>> This adds the freefall / motion interrupt source definitions to the driver.
>> It is not in use now, but mma_chip_info and iio_chan_spec can easily be
>> adapted to use it instead of the transient interrupt source.
> So some support is added, but nothing done with it? Not sure we want
> to do this as it adds unused code paths.
>
> Why not support this fully?
Ah, I get it now. Used in next patch. Please add a comment here to indicate
that!
>>
>> Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com>
>> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
>> ---
>> drivers/iio/accel/mma8452.c | 45 ++++++++++++++++++++++++++++++++++++---------
>> 1 file changed, 36 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
>> index 209b0d7..0498b6e 100644
>> --- a/drivers/iio/accel/mma8452.c
>> +++ b/drivers/iio/accel/mma8452.c
>> @@ -38,9 +38,18 @@
>> #define MMA8452_DATA_CFG 0x0e
>> #define MMA8452_HP_FILTER_CUTOFF 0x0f
>> #define MMA8452_HP_FILTER_CUTOFF_SEL_MASK (BIT(0) | BIT(1))
>> +#define MMA8452_FF_MT_CFG 0x15
>> +#define MMA8452_FF_MT_CFG_OAE BIT(6)
>> +#define MMA8452_FF_MT_CFG_ELE BIT(7)
>> +#define MMA8452_FF_MT_SRC 0x16
>> +#define MMA8452_FF_MT_SRC_XHE BIT(1)
>> +#define MMA8452_FF_MT_SRC_YHE BIT(3)
>> +#define MMA8452_FF_MT_SRC_ZHE BIT(5)
>> +#define MMA8452_FF_MT_THS 0x17
>> +#define MMA8452_FF_MT_THS_MASK 0x7f
>> +#define MMA8452_FF_MT_COUNT 0x18
>> #define MMA8452_TRANSIENT_CFG 0x1d
>> #define MMA8452_TRANSIENT_CFG_ELE BIT(4)
>> -#define MMA8452_TRANSIENT_CFG_CHAN(chan) BIT(chan + 1)
>> #define MMA8452_TRANSIENT_CFG_HPF_BYP BIT(0)
>> #define MMA8452_TRANSIENT_SRC 0x1e
>> #define MMA8452_TRANSIENT_SRC_XTRANSE BIT(1)
>> @@ -74,6 +83,7 @@
>> #define MMA8452_DATA_CFG_HPF_MASK BIT(4)
>>
>> #define MMA8452_INT_DRDY BIT(0)
>> +#define MMA8452_INT_FF_MT BIT(2)
>> #define MMA8452_INT_TRANS BIT(5)
>>
>> #define MMA8452_DEVICE_ID 0x2a
>> @@ -564,7 +574,8 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
>> else
>> val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift);
>>
>> - val |= MMA8452_TRANSIENT_CFG_ELE;
>> + val |= chip->ev_cfg_ele;
>> + val |= MMA8452_FF_MT_CFG_OAE;
>>
>> return mma8452_change_config(data, chip->ev_cfg, val);
>> }
>> @@ -605,6 +616,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
>> {
>> struct iio_dev *indio_dev = p;
>> struct mma8452_data *data = iio_priv(indio_dev);
>> + const struct mma_chip_info *chip = data->chip_info;
>> int ret = IRQ_NONE;
>> int src;
>>
>> @@ -617,7 +629,10 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
>> ret = IRQ_HANDLED;
>> }
>>
>> - if (src & MMA8452_INT_TRANS) {
>> + if ((src & MMA8452_INT_TRANS &&
>> + chip->ev_src == MMA8452_TRANSIENT_SRC) ||
>> + (src & MMA8452_INT_FF_MT &&
>> + chip->ev_src == MMA8452_FF_MT_SRC)) {
>> mma8452_transient_interrupt(indio_dev);
>> ret = IRQ_HANDLED;
>> }
>> @@ -678,6 +693,16 @@ static const struct iio_event_spec mma8452_transient_event[] = {
>> },
>> };
>>
>> +static const struct iio_event_spec mma8452_motion_event[] = {
>> + {
>> + .type = IIO_EV_TYPE_THRESH,
>> + .dir = IIO_EV_DIR_RISING,
>> + .mask_separate = BIT(IIO_EV_INFO_ENABLE),
>> + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
>> + BIT(IIO_EV_INFO_PERIOD)
>> + },
>> +};
>> +
>> /*
>> * Threshold is configured in fixed 8G/127 steps regardless of
>> * currently selected scale for measurement.
>> @@ -962,13 +987,15 @@ static int mma8452_probe(struct i2c_client *client,
>>
>> if (client->irq) {
>> /*
>> - * Although we enable the transient interrupt source once and
>> - * for all here the transient event detection itself is not
>> - * enabled until userspace asks for it by
>> - * mma8452_write_event_config()
>> + * Although we enable the interrupt sources once and for
>> + * all here the event detection itself is not enabled until
>> + * userspace asks for it by mma8452_write_event_config()
>> */
>> - int supported_interrupts = MMA8452_INT_DRDY | MMA8452_INT_TRANS;
>> - int enabled_interrupts = MMA8452_INT_TRANS;
>> + int supported_interrupts = MMA8452_INT_DRDY |
>> + MMA8452_INT_TRANS |
>> + MMA8452_INT_FF_MT;
>> + int enabled_interrupts = MMA8452_INT_TRANS |
>> + MMA8452_INT_FF_MT;
>>
>> /* Assume wired to INT1 pin */
>> ret = i2c_smbus_write_byte_data(client,
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>



\
 
 \ /
  Last update: 2015-07-05 14:01    [W:0.041 / U:2.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site