lkml.org 
[lkml]   [2015]   [Jul]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 12/17] ARM: dts: am57xx-beagle-x15: Fix regulator populated in MMC1 dt node
On 07/29/2015 06:09 AM, Kishon Vijay Abraham I wrote:
> For beagle x15, both the vdd and io lines are connected to the
> same regulator (ldo1_reg). However vmmc_aux is populated to vdd_3v3.
> Remove it.
>
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
> arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> index a63bf78..d0db5c5 100644
> --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
> +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
> @@ -579,7 +579,6 @@
> pinctrl-0 = <&mmc1_pins_default>;
>
> vmmc-supply = <&ldo1_reg>;
> - vmmc_aux-supply = <&vdd_3v3>;
> pbias-supply = <&pbias_mmc_reg>;
> bus-width = <4>;
> cd-gpios = <&gpio6 27 0>; /* gpio 219 */
>
Acked-by: Nishanth Menon <nm@ti.com>

--
Regards,
Nishanth Menon


\
 
 \ /
  Last update: 2015-07-29 22:21    [W:0.188 / U:1.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site