lkml.org 
[lkml]   [2015]   [Jul]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH,v3 1/3] doc: dt: Update eTSEC bindings doc
Date
Update the eTSEC bindings document with missing info on
properties that are already in use for the PPC platforms:
* "tbi-phy" property;
* "fsl,etsec2" compatibility string;

Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
---
v2 - none;
v3 - added "tbi-handle" documentation;
- fixed typo ("fsl,etsec2" is the correct string);

Documentation/devicetree/bindings/net/fsl-tsec-phy.txt | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
index 1e97532..325c07d 100644
--- a/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
+++ b/Documentation/devicetree/bindings/net/fsl-tsec-phy.txt
@@ -45,12 +45,15 @@ Properties:

- device_type : Should be "network"
- model : Model of the device. Can be "TSEC", "eTSEC", or "FEC"
- - compatible : Should be "gianfar"
+ - compatible : "gianfar", "fsl,etsec2"
- reg : Offset and length of the register set for the device
- interrupts : For FEC devices, the first interrupt is the device's
interrupt. For TSEC and eTSEC devices, the first interrupt is
transmit, the second is receive, and the third is error.
- phy-handle : See ethernet.txt file in the same directory.
+ - tbi-handle : Handle to a tbi-phy node containing information about
+ the TBIPA register needed to initialize the TBI PHY. See
+ "TBI Internal MDIO bus", this document.
- fixed-link : See fixed-link.txt in the same directory.
- phy-connection-type : See ethernet.txt file in the same directory.
This property is only really needed if the connection is of type
--
1.7.11.7


\
 
 \ /
  Last update: 2015-07-28 17:21    [W:0.109 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site