[lkml]   [2015]   [Jul]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Subject[PATCH v5 0/6] add device tree support for mxc rtc
This serie add the device tree support for the mxc rtc driver.
To do this, three steps are required :
- define two rtc clocks for imx31 and imx35
- enhance mxc rtc driver to use two clocks (ref and ipg)
- add device tree support to mxc rtc driver

v5: (thanks Shawn Guo, Rob Herring and Alexandre Belloni)
- rename rtc clock to ref
- fix typo in binding documentation
- enable rtc by default on imx27
v4: (thanks Alexandre Belloni)
- add prepare_clock for rtc clock
- split apf27: dt: enable support in two patches
v3: (thanks Fabio Estevam)
- fix typo in imx35 clock comment
v2: (thanks Shawn Guo and Alexandre Belloni)
- add a second clock to imx35
- split the add of clock in a separate patches
- split the dt documentation in a separate patch

Philippe Reynes (6):
imx31: add a second rtc clock
imx35: define two clocks for rtc
rtc: mxc: use a second rtc clock
dt-binding: document the binding for mxc rtc
rtc: mxc: add support of device tree
imx27: dt: add support of internal rtc

Documentation/devicetree/bindings/rtc/rtc-mxc.txt | 26 +++++++++
arch/arm/boot/dts/imx27.dtsi | 9 +++
drivers/clk/imx/clk-imx31.c | 3 +-
drivers/clk/imx/clk-imx35.c | 6 ++-
drivers/rtc/rtc-mxc.c | 60 ++++++++++++++++-----
5 files changed, 88 insertions(+), 16 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt


 \ /
  Last update: 2015-07-27 00:01    [W:0.112 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site