lkml.org 
[lkml]   [2015]   [Jul]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC v4 03/25] m68k/atari: Move Atari-specific code out of drivers/char/nvram.c

On Sun, 26 Jul 2015, Michael Schmitz wrote:

> Hi Finn,
>
> For the sake of completeness: further testing on ARAnyM shows no difference
> between original and patched kernel in the NVRAM proc and diff outputs:
>
> scsi host0: Atari native SCSI, io_port 0x0, n_io_port 0, base 0x0, irq 15,
> can_queue 8, cmd_per_lun 1, sg_tablesize 0, this_id 7, flags { }, options {
> REAL_DMA SUPPORT_TAGS }
> Checksum status : valid
> Boot preference : unspecified
> SCSI arbitration : on
> SCSI host ID : 7
> OS language : English (US)
> Keyboard language: English (US)
> Date format : DD.MM.YY, 24h clock
> Boot delay : 32s
> Video mode : 4 colors, 40 columns, TV NTSC monitor
> no overscan, compat. mode off
> 00000000 00 00 00 00 00 00 00 00 11 2e 20 01 ff 00 00 3b |.......... ....;|
> 00000010 87 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
> 00000020 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
> 00000030 de 21 |.!|
> 00000032

I'd expect to see a change in the Video mode above, because of patch 2.

With 0x3B in byte 15, I'd expect the patched kernel to produce something
similar to Christian's /proc/driver/nvram results.

--


\
 
 \ /
  Last update: 2015-07-26 03:41    [W:0.118 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site