lkml.org 
[lkml]   [2015]   [Jul]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 7/8] mfd: pm8921: Implement irq_get_irqchip_state
On Tue, 14 Jul 2015, Bjorn Andersson wrote:

> Implement irq_chip->irq_get_irqchip_state to make it possible for PMIC
> block drivers to access the IRQ real time status bits. The status bits
> are used for various kinds of input signals, e.g. GPIO.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
>
> Changes since v1:
> - Drop extra check for !chip
> - Simplify return value
>
> drivers/mfd/pm8921-core.c | 38 ++++++++++++++++++++++++++++++++++++++
> 1 file changed, 38 insertions(+)

Applied, thanks.

> diff --git a/drivers/mfd/pm8921-core.c b/drivers/mfd/pm8921-core.c
> index 5a92646a2ccb..00856a67d34b 100644
> --- a/drivers/mfd/pm8921-core.c
> +++ b/drivers/mfd/pm8921-core.c
> @@ -236,11 +236,49 @@ static int pm8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
> return pm8xxx_config_irq(chip, block, config);
> }
>
> +static int pm8xxx_irq_get_irqchip_state(struct irq_data *d,
> + enum irqchip_irq_state which,
> + bool *state)
> +{
> + struct pm_irq_chip *chip = irq_data_get_irq_chip_data(d);
> + unsigned int pmirq = irqd_to_hwirq(d);
> + unsigned int bits;
> + int irq_bit;
> + u8 block;
> + int rc;
> +
> + if (which != IRQCHIP_STATE_LINE_LEVEL)
> + return -EINVAL;
> +
> + block = pmirq / 8;
> + irq_bit = pmirq % 8;
> +
> + spin_lock(&chip->pm_irq_lock);
> + rc = regmap_write(chip->regmap, SSBI_REG_ADDR_IRQ_BLK_SEL, block);
> + if (rc) {
> + pr_err("Failed Selecting Block %d rc=%d\n", block, rc);
> + goto bail;
> + }
> +
> + rc = regmap_read(chip->regmap, SSBI_REG_ADDR_IRQ_RT_STATUS, &bits);
> + if (rc) {
> + pr_err("Failed Reading Status rc=%d\n", rc);
> + goto bail;
> + }
> +
> + *state = !!(bits & BIT(irq_bit));
> +bail:
> + spin_unlock(&chip->pm_irq_lock);
> +
> + return rc;
> +}
> +
> static struct irq_chip pm8xxx_irq_chip = {
> .name = "pm8xxx",
> .irq_mask_ack = pm8xxx_irq_mask_ack,
> .irq_unmask = pm8xxx_irq_unmask,
> .irq_set_type = pm8xxx_irq_set_type,
> + .irq_get_irqchip_state = pm8xxx_irq_get_irqchip_state,
> .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
> };
>

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-07-23 17:01    [W:0.062 / U:1.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site