lkml.org 
[lkml]   [2015]   [Jul]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] mmc: omap_hsmmc: Update driver to support without regulators
Hi,

On Wednesday 22 July 2015 05:37 PM, Ulf Hansson wrote:
> [...]
>
>> Hi Ulf,
>>
>> Just to clarify do you have an issue with this patch or in general
>> you rather nothave !CONFIG_REGULATOR supported? If its the latter
>> then wouldit be better to remove the !CONFIG_REGULATOR portion from
>> this driver all together.
>
> I don't like this patch as is, as it seems like you are replacing the
> VMMC regulator that actually exist in HW by parsing a DT property.
>
> I think mmc_of_parse_voltage() shall *only* be used when the OCR mask
> (->ocr_avail) can't be fetched by using a regulator. Typically that's
> when the VMMC voltage levels are managed within the mmc controller
> itself.
>
> I don't have a strong opinion on how you solve that, but I guess you
> have two options.
>
> 1.
> Make sure the driver can be build and used both for CONFIG_REGULATOR
> and !CONFIG_REGULATOR. What you need to take care of then, is to
> assign the ->ocr_avail mask to a default value in the case when it
> can't be fetched from a regulator. Most mmc drivers has some kind of
> fall-back mechanism like this.

I'm working on cleaning up omap_hsmmc driver where I have taken care to avoid
dependency with CONFIG_REGULATOR. I'll post the series asap.

Thanks
Kishon


\
 
 \ /
  Last update: 2015-07-22 14:41    [W:0.039 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site