lkml.org 
[lkml]   [2015]   [Jul]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/6] mailbox: Add support for ST's Mailbox IP
On Tue, 21 Jul 2015, Jassi Brar wrote:

> On Tue, Jul 21, 2015 at 9:22 PM, Lee Jones <lee.jones@linaro.org> wrote:
> > On Tue, 21 Jul 2015, Jassi Brar wrote:
> >
> >> >
> >> >> > +static int sti_mbox_send_data(struct mbox_chan *chan, void *data)
> >> >> > +{
> >> >> > + struct sti_channel *chan_info = chan->con_priv;
> >> >> > + struct sti_mbox_device *mdev = chan_info->mdev;
> >> >> > + struct sti_mbox_pdata *pdata = dev_get_platdata(mdev->dev);
> >> >> > + unsigned int instance = chan_info->instance;
> >> >> > + unsigned int channel = chan_info->channel;
> >> >> > + void __iomem *base;
> >> >> > +
> >> >> > + if (!sti_mbox_tx_is_ready(chan))
> >> >> > + return -EBUSY;
> >> >> This is the first thing I look out for in every new driver :) this
> >> >> check is unnecessary.
> >> >
> >> > In what way? What if the channel is disabled or there is an IRQ
> >> > already pending?
> >> >
> >> API calls send_data() only if last_tx_done() returned true.
> >
> > I know for a fact that the 'catchers' in sti_mbox_tx_is_ready() to
> > fire, because I have triggered them. I'd really rather keep this
> > harmless check in.
> >
> If you put some printk in send_data() and last_tx_done() you'll see
> what I mean :)
>
> >> >> > +static const struct sti_mbox_pdata mbox_stih407_pdata = {
> >> >> > + .num_inst = 4,
> >> >> > + .num_chan = 32,
> >> >> > + .irq_val = 0x04,
> >> >> > + .irq_set = 0x24,
> >> >> > + .irq_clr = 0x44,
> >> >> > + .ena_val = 0x64,
> >> >> > + .ena_set = 0x84,
> >> >> > + .ena_clr = 0xa4,
> >> >> >
> >> >> Register offsets are parameters of the controller
> >> >
> >> > And this is a controller driver? Not sure I get the point.
> >> >
> >> Platform_data usually carries board/platform specific parameters.
> >> Register offset "properties" are as fixed as the behavior of the
> >> controller, so they should stay inside the code, not come via
> >> platform_data.
> >
> > That's not the case for this controller. There is nothing preventing
> > these values from changing on a new board revisions.
> >
> Hmm ... interesting! Can't see how enable/disable channel and irq
> set/clear could be effected by writing to random, but agreed upon,
> location between two processors. There ought to be some controller
> listening there? Now I am more interested in knowing this IP :)

High level
----------

MB0 MB1 MB2 MB3 MB4
+---------+---------+---------+---------+---------+
INST0 | | | | | |
+---------+---------+---------+---------+---------+
INST1 | | | | | |
+---------+---------+---------+---------+---------+
INST2 | | | | | |
+---------+---------+---------+---------+---------+
INST3 | | | | | |
+---------+---------+---------+---------+---------+

Low level [each box above looks like this)
------------------------------------------

1 32
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
IRQ_VAL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
IRQ_SET | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
IRQ_CLR | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
ENB_VAL | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
ENB_SET | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
ENB_CLR | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+

That's it. That's the entirety of the "IP".

--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog


\
 
 \ /
  Last update: 2015-07-21 20:01    [W:0.045 / U:0.820 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site