lkml.org 
[lkml]   [2015]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v1 4/7] input: cyapa: fully support runtime suspend power management
On Mon, Jun 15, 2015 at 05:01:34PM +0800, Dudley Du wrote:
> Fix the the runtime suspend power management not working issue when system
> starts up and before user touches the trackpad device.
> TEST=test on Chromebook.
>
> Signed-off-by: Dudley Du <dudl@cypress.com>

Applied, thank you.

> ---
> drivers/input/mouse/cyapa.c | 79 +++++++++++++++++++++++++++-------------
> drivers/input/mouse/cyapa.h | 2 +-
> drivers/input/mouse/cyapa_gen3.c | 4 +-
> drivers/input/mouse/cyapa_gen5.c | 21 +++++++----
> drivers/input/mouse/cyapa_gen6.c | 4 +-
> 5 files changed, 72 insertions(+), 38 deletions(-)
>
> diff --git a/drivers/input/mouse/cyapa.c b/drivers/input/mouse/cyapa.c
> index d2a24fc..9288948 100644
> --- a/drivers/input/mouse/cyapa.c
> +++ b/drivers/input/mouse/cyapa.c
> @@ -371,7 +371,7 @@ static int cyapa_detect(struct cyapa *cyapa)
> static int cyapa_open(struct input_dev *input)
> {
> struct cyapa *cyapa = input_get_drvdata(input);
> - struct i2c_client *client = cyapa->client;
> + struct device *dev = &cyapa->client->dev;
> int error;
>
> error = mutex_lock_interruptible(&cyapa->state_sync_lock);
> @@ -385,10 +385,9 @@ static int cyapa_open(struct input_dev *input)
> * when in operational mode.
> */
> error = cyapa->ops->set_power_mode(cyapa,
> - PWR_MODE_FULL_ACTIVE, 0);
> + PWR_MODE_FULL_ACTIVE, 0, false);
> if (error) {
> - dev_warn(&client->dev,
> - "set active power failed: %d\n", error);
> + dev_warn(dev, "set active power failed: %d\n", error);
> goto out;
> }
> } else {
> @@ -399,11 +398,15 @@ static int cyapa_open(struct input_dev *input)
> }
> }
>
> - enable_irq(client->irq);
> - if (!pm_runtime_enabled(&client->dev)) {
> - pm_runtime_set_active(&client->dev);
> - pm_runtime_enable(&client->dev);
> + enable_irq(cyapa->client->irq);
> + if (!pm_runtime_enabled(dev)) {
> + pm_runtime_set_active(dev);
> + pm_runtime_enable(dev);
> }
> +
> + pm_runtime_get_sync(dev);
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_sync_autosuspend(dev);
> out:
> mutex_unlock(&cyapa->state_sync_lock);
> return error;
> @@ -412,17 +415,17 @@ out:
> static void cyapa_close(struct input_dev *input)
> {
> struct cyapa *cyapa = input_get_drvdata(input);
> - struct i2c_client *client = cyapa->client;
> + struct device *dev = &cyapa->client->dev;
>
> mutex_lock(&cyapa->state_sync_lock);
>
> - disable_irq(client->irq);
> - if (pm_runtime_enabled(&client->dev))
> - pm_runtime_disable(&client->dev);
> - pm_runtime_set_suspended(&client->dev);
> + disable_irq(cyapa->client->irq);
> + if (pm_runtime_enabled(dev))
> + pm_runtime_disable(dev);
> + pm_runtime_set_suspended(dev);
>
> if (cyapa->operational)
> - cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0);
> + cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0, false);
>
> mutex_unlock(&cyapa->state_sync_lock);
> }
> @@ -533,7 +536,7 @@ static void cyapa_enable_irq_for_cmd(struct cyapa *cyapa)
> */
> if (!input || cyapa->operational)
> cyapa->ops->set_power_mode(cyapa,
> - PWR_MODE_FULL_ACTIVE, 0);
> + PWR_MODE_FULL_ACTIVE, 0, false);
> /* Gen3 always using polling mode for command. */
> if (cyapa->gen >= CYAPA_GEN5)
> enable_irq(cyapa->client->irq);
> @@ -548,7 +551,8 @@ static void cyapa_disable_irq_for_cmd(struct cyapa *cyapa)
> if (cyapa->gen >= CYAPA_GEN5)
> disable_irq(cyapa->client->irq);
> if (!input || cyapa->operational)
> - cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0);
> + cyapa->ops->set_power_mode(cyapa,
> + PWR_MODE_OFF, 0, false);
> }
> }
>
> @@ -615,7 +619,7 @@ static int cyapa_initialize(struct cyapa *cyapa)
>
> /* Power down the device until we need it. */
> if (cyapa->operational)
> - cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0);
> + cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0, false);
>
> return 0;
> }
> @@ -631,7 +635,8 @@ static int cyapa_reinitialize(struct cyapa *cyapa)
>
> /* Avoid command failures when TP was in OFF state. */
> if (cyapa->operational)
> - cyapa->ops->set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE, 0);
> + cyapa->ops->set_power_mode(cyapa,
> + PWR_MODE_FULL_ACTIVE, 0, false);
>
> error = cyapa_detect(cyapa);
> if (error)
> @@ -650,7 +655,8 @@ out:
> if (!input || !input->users) {
> /* Reset to power OFF state to save power when no user open. */
> if (cyapa->operational)
> - cyapa->ops->set_power_mode(cyapa, PWR_MODE_OFF, 0);
> + cyapa->ops->set_power_mode(cyapa,
> + PWR_MODE_OFF, 0, false);
> } else if (!error && cyapa->operational) {
> /*
> * Make sure only enable runtime PM when device is
> @@ -658,6 +664,10 @@ out:
> */
> pm_runtime_set_active(dev);
> pm_runtime_enable(dev);
> +
> + pm_runtime_get_sync(dev);
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_sync_autosuspend(dev);
> }
>
> return error;
> @@ -667,8 +677,8 @@ static irqreturn_t cyapa_irq(int irq, void *dev_id)
> {
> struct cyapa *cyapa = dev_id;
> struct device *dev = &cyapa->client->dev;
> + int error;
>
> - pm_runtime_get_sync(dev);
> if (device_may_wakeup(dev))
> pm_wakeup_event(dev, 0);
>
> @@ -687,7 +697,24 @@ static irqreturn_t cyapa_irq(int irq, void *dev_id)
> goto out;
> }
>
> - if (!cyapa->operational || cyapa->ops->irq_handler(cyapa)) {
> + if (cyapa->operational) {
> + error = cyapa->ops->irq_handler(cyapa);
> +
> + /*
> + * Apply runtime power management to touch report event
> + * except the events caused by the command responses.
> + * Note:
> + * It will introduce about 20~40 ms additional delay
> + * time in receiving for first valid touch report data.
> + * The time is used to execute device runtime resume
> + * process.
> + */
> + pm_runtime_get_sync(dev);
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_sync_autosuspend(dev);
> + }
> +
> + if (!cyapa->operational || error) {
> if (!mutex_trylock(&cyapa->state_sync_lock)) {
> cyapa->ops->sort_empty_output_data(cyapa,
> NULL, NULL, NULL);
> @@ -699,8 +726,6 @@ static irqreturn_t cyapa_irq(int irq, void *dev_id)
> }
>
> out:
> - pm_runtime_mark_last_busy(dev);
> - pm_runtime_put_sync_autosuspend(dev);
> return IRQ_HANDLED;
> }
>
> @@ -1341,7 +1366,7 @@ static int __maybe_unused cyapa_suspend(struct device *dev)
> power_mode = device_may_wakeup(dev) ? cyapa->suspend_power_mode
> : PWR_MODE_OFF;
> error = cyapa->ops->set_power_mode(cyapa, power_mode,
> - cyapa->suspend_sleep_time);
> + cyapa->suspend_sleep_time, true);
> if (error)
> dev_err(dev, "suspend set power mode failed: %d\n",
> error);
> @@ -1395,7 +1420,8 @@ static int __maybe_unused cyapa_runtime_suspend(struct device *dev)
>
> error = cyapa->ops->set_power_mode(cyapa,
> cyapa->runtime_suspend_power_mode,
> - cyapa->runtime_suspend_sleep_time);
> + cyapa->runtime_suspend_sleep_time,
> + false);
> if (error)
> dev_warn(dev, "runtime suspend failed: %d\n", error);
>
> @@ -1407,7 +1433,8 @@ static int __maybe_unused cyapa_runtime_resume(struct device *dev)
> struct cyapa *cyapa = dev_get_drvdata(dev);
> int error;
>
> - error = cyapa->ops->set_power_mode(cyapa, PWR_MODE_FULL_ACTIVE, 0);
> + error = cyapa->ops->set_power_mode(cyapa,
> + PWR_MODE_FULL_ACTIVE, 0, false);
> if (error)
> dev_warn(dev, "runtime resume failed: %d\n", error);
>
> diff --git a/drivers/input/mouse/cyapa.h b/drivers/input/mouse/cyapa.h
> index 203d7a2..a734ab8 100644
> --- a/drivers/input/mouse/cyapa.h
> +++ b/drivers/input/mouse/cyapa.h
> @@ -273,7 +273,7 @@ struct cyapa_dev_ops {
> int (*sort_empty_output_data)(struct cyapa *,
> u8 *, int *, cb_sort);
>
> - int (*set_power_mode)(struct cyapa *, u8, u16);
> + int (*set_power_mode)(struct cyapa *, u8, u16, bool);
>
> int (*set_proximity)(struct cyapa *, bool);
> };
> diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c
> index 6460beb..1274b3f 100644
> --- a/drivers/input/mouse/cyapa_gen3.c
> +++ b/drivers/input/mouse/cyapa_gen3.c
> @@ -950,7 +950,7 @@ static u16 cyapa_get_wait_time_for_pwr_cmd(u8 pwr_mode)
> * Device power mode can only be set when device is in operational mode.
> */
> static int cyapa_gen3_set_power_mode(struct cyapa *cyapa, u8 power_mode,
> - u16 always_unused)
> + u16 always_unused, bool is_suspend_unused)
> {
> int ret;
> u8 power;
> @@ -1107,7 +1107,7 @@ static int cyapa_gen3_do_operational_check(struct cyapa *cyapa)
> * may cause problems, so we set the power mode first here.
> */
> error = cyapa_gen3_set_power_mode(cyapa,
> - PWR_MODE_FULL_ACTIVE, 0);
> + PWR_MODE_FULL_ACTIVE, 0, false);
> if (error)
> dev_err(dev, "%s: set full power mode failed: %d\n",
> __func__, error);
> diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c
> index 519d437..e311b1b 100644
> --- a/drivers/input/mouse/cyapa_gen5.c
> +++ b/drivers/input/mouse/cyapa_gen5.c
> @@ -19,6 +19,7 @@
> #include <linux/slab.h>
> #include <asm/unaligned.h>
> #include <linux/crc-itu-t.h>
> +#include <linux/pm_runtime.h>
> #include "cyapa.h"
>
>
> @@ -1565,7 +1566,7 @@ int cyapa_pip_deep_sleep(struct cyapa *cyapa, u8 state)
> }
>
> static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
> - u8 power_mode, u16 sleep_time)
> + u8 power_mode, u16 sleep_time, bool is_suspend)
> {
> struct device *dev = &cyapa->client->dev;
> u8 power_state;
> @@ -1574,9 +1575,6 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
> if (cyapa->state != CYAPA_STATE_GEN5_APP)
> return 0;
>
> - /* Dump all the report data before do power mode commmands. */
> - cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
> -
> if (PIP_DEV_GET_PWR_STATE(cyapa) == UNINIT_PWR_MODE) {
> /*
> * Assume TP in deep sleep mode when driver is loaded,
> @@ -1679,8 +1677,8 @@ static int cyapa_gen5_set_power_mode(struct cyapa *cyapa,
> * is suspending which may cause interrupt line unable to be
> * asserted again.
> */
> - cyapa_empty_pip_output_data(cyapa, NULL, NULL, NULL);
> - cyapa_gen5_disable_pip_report(cyapa);
> + if (is_suspend)
> + cyapa_gen5_disable_pip_report(cyapa);
>
> PIP_DEV_SET_PWR_STATE(cyapa,
> cyapa_sleep_time_to_pwr_cmd(sleep_time));
> @@ -2515,7 +2513,7 @@ static int cyapa_gen5_do_operational_check(struct cyapa *cyapa)
> * the device state is required.
> */
> error = cyapa_gen5_set_power_mode(cyapa,
> - PWR_MODE_FULL_ACTIVE, 0);
> + PWR_MODE_FULL_ACTIVE, 0, false);
> if (error)
> dev_warn(dev, "%s: failed to set power active mode.\n",
> __func__);
> @@ -2757,7 +2755,16 @@ int cyapa_pip_irq_handler(struct cyapa *cyapa)
> /*
> * Device wake event from deep sleep mode for touch.
> * This interrupt event is used to wake system up.
> + *
> + * Note:
> + * It will introduce about 20~40 ms additional delay
> + * time in receiving for first valid touch report data.
> + * The time is used to execute device runtime resume
> + * process.
> */
> + pm_runtime_get_sync(dev);
> + pm_runtime_mark_last_busy(dev);
> + pm_runtime_put_sync_autosuspend(dev);
> return 0;
> } else if (report_id != PIP_TOUCH_REPORT_ID &&
> report_id != PIP_BTN_REPORT_ID &&
> diff --git a/drivers/input/mouse/cyapa_gen6.c b/drivers/input/mouse/cyapa_gen6.c
> index e97c1b5..f2287ed 100644
> --- a/drivers/input/mouse/cyapa_gen6.c
> +++ b/drivers/input/mouse/cyapa_gen6.c
> @@ -429,7 +429,7 @@ static int cyapa_gen6_deep_sleep(struct cyapa *cyapa, u8 state)
> }
>
> static int cyapa_gen6_set_power_mode(struct cyapa *cyapa,
> - u8 power_mode, u16 sleep_time)
> + u8 power_mode, u16 sleep_time, bool is_suspend)
> {
> struct device *dev = &cyapa->client->dev;
> struct gen6_interval_setting *interval_setting =
> @@ -690,7 +690,7 @@ static int cyapa_gen6_operational_check(struct cyapa *cyapa)
> * the device state is required.
> */
> error = cyapa_gen6_set_power_mode(cyapa,
> - PWR_MODE_FULL_ACTIVE, 0);
> + PWR_MODE_FULL_ACTIVE, 0, false);
> if (error)
> dev_warn(dev, "%s: failed to set power active mode.\n",
> __func__);
> --
> 1.9.1
>
>
> ---------------------------------------------------------------
> This message and any attachments may contain Cypress (or its
> subsidiaries) confidential information. If it has been received
> in error, please advise the sender and immediately delete this
> message.
> ---------------------------------------------------------------
>

--
Dmitry


\
 
 \ /
  Last update: 2015-07-21 02:21    [W:0.122 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site