Messages in this thread | | | From | Robert Jarzmik <> | Subject | Re: [PATCH v2 0/4] mtd: pxa3xx_nand: rework the timing setup | Date | Mon, 20 Jul 2015 21:49:44 +0200 |
| |
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> writes:
> Here you go: > > http://git.infradead.org/users/ezequielg/linux/shortlog/refs/heads/pxa3xx-nand-timing-rework-v2
Okay, I've tested this on cm-x300. The result is not bright : nand: device found, Manufacturer ID: 0xec, Chip ID: 0xdc nand: Samsung NAND 512MiB 3,3V 8-bit nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 pxa3xx-nand pxa3xx-nand: ECC strength 1, ECC step size 512 Scanning device for bad blocks random: nonblocking pool is initialized Bad eraseblock 1037 at 0x0000081a0000 Creating 6 MTD partitions on "pxa3xx_nand-0": 0x000000000000-0x000000040000 : "OBM" 0x000000040000-0x000000080000 : "U-Boot" 0x000000080000-0x0000000c0000 : "Environment" 0x0000000c0000-0x000000200000 : "reserved" 0x000000200000-0x000000600000 : "kernel" 0x000000600000-0x000020000000 : "fs"
The bad black is not bad normally. And then : # dd if=/dev/mtd0 of=toto count=1 pxa3xx-nand pxa3xx-nand: Wait time out!!! 1+0 records in 1+0 records out # ls -l toto -rw-r--r-- 1 root root 512 Jan 1 00:02 toto # hexdump-C toto 00000000 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff |................| * 00000200
That's not possible, as it should have dumped the OBMI.
And yet, I hesitate to incriminate this patchset, I will try without it. It wont be very fast, as my USB to serial converter just broke, and my order will take a couple of days to complete.
And of course without this converter I cannot test anymore, especially the zylonite board which will be more interesting.
So I'll report back as soon as the UK mail has completed the shipment.
Cheers.
-- Robert
| |