lkml.org 
[lkml]   [2015]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] cpufreq: Avoid double addition/removal of sysfs links
On Mon, Jul 20, 2015 at 03:17:10PM +0530, Viresh Kumar wrote:
> Consider a dual core (0/1) system with two CPUs:
> - sharing clock/voltage rails and hence cpufreq-policy
> - CPU1 is offline while the cpufreq driver is registered
>
> - cpufreq_add_dev() is called from subsys callback for CPU0 and we
> create the policy for the CPUs and create link for CPU1.
> - cpufreq_add_dev() is called from subsys callback for CPU1, we find
> that the cpu is offline and we try to create a sysfs link for CPU1.
> - This results in double addition of the sysfs link and we get this:
>
> WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x60/0x7c()
> sysfs: cannot create duplicate filename '/devices/system/cpu/cpu1/cpufreq'
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc2+ #1704
> Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
> Backtrace:
> [<c0013248>] (dump_backtrace) from [<c00133e4>] (show_stack+0x18/0x1c)
> r6:c01a1f30 r5:0000001f r4:00000000 r3:00000000
> [<c00133cc>] (show_stack) from [<c076920c>] (dump_stack+0x7c/0x98)
> [<c0769190>] (dump_stack) from [<c0029ab4>] (warn_slowpath_common+0x80/0xbc)
> r4:d74abbd0 r3:d74c0000
> [<c0029a34>] (warn_slowpath_common) from [<c0029b94>] (warn_slowpath_fmt+0x38/0x40)
> r8:ffffffef r7:00000000 r6:d75a8960 r5:c0993280 r4:d6b4d000
> [<c0029b60>] (warn_slowpath_fmt) from [<c01a1f30>] (sysfs_warn_dup+0x60/0x7c)
> r3:d6b4dfe7 r2:c0930750
> [<c01a1ed0>] (sysfs_warn_dup) from [<c01a22c8>] (sysfs_do_create_link_sd+0xb8/0xc0)
> r6:d75a8960 r5:c0993280 r4:d00aba20
> [<c01a2210>] (sysfs_do_create_link_sd) from [<c01a22fc>] (sysfs_create_link+0x2c/0x3c)
> r10:00000001 r8:c14db3c8 r7:d7b89010 r6:c0ae7c60 r5:d7b89010 r4:d00d1200
> [<c01a22d0>] (sysfs_create_link) from [<c0506160>] (add_cpu_dev_symlink+0x34/0x5c)
> [<c050612c>] (add_cpu_dev_symlink) from [<c05084d0>] (cpufreq_add_dev+0x674/0x794)
> r5:00000001 r4:00000000
> [<c0507e5c>] (cpufreq_add_dev) from [<c03db114>] (subsys_interface_register+0x8c/0xd0)
> r10:00000003 r9:d7bb01f0 r8:c14db3c8 r7:00106738 r6:c0ae7c60 r5:c0acbd08
> r4:c0ae7e20
> [<c03db088>] (subsys_interface_register) from [<c0508a2c>] (cpufreq_register_driver+0x104/0x1f4)
>
>
> The check for offline-cpu in cpufreq_add_dev() is present to ensure that
> link gets added for the CPUs, that weren't physically present earlier
> and we missed the case where a CPU is offline while registering the
> driver.
>
> Fix this by keeping track of CPUs for which link is already created, and
> avoiding duplicate sysfs entries.

Why do we try to create the symlink for CPU devices which we haven't
"detected" yet (iow, we haven't had cpufreq_add_dev() called for)?
Surely we are guaranteed to have cpufreq_add_dev() called for every
CPU which exists in sysfs? So why not _only_ create the sysfs symlinks
when cpufreq_add_dev() is notified that a CPU subsys interface is
present?

Sure, if the policy changes, we need to do maintanence on these symlinks,
but I see only one path down into cpufreq_add_dev_symlink(), which is:

cpufreq_add_dev() -> cpufreq_add_dev_interface() ->
cpufreq_add_dev_symlink()

In other words, only when we see a new CPU interface appears, not when
the policy changes. If the set of related CPUs is policy independent,
why is this information carried in the cpufreq_policy struct?

If it is policy dependent, then I see no code which handles the effect
of a policy change where the policy->related_cpus is different. To me,
that sounds like a rather huge design hole.

Things get worse. Reading drivers/base/cpu.c, CPU interface nodes are
only ever created - they're created for the set of _possible_ CPUs in
the system, not those which are possible and present, and there is no
unregister_cpu() API, only a register_cpu() API. So, cpufreq_remove_dev()
won't be called for CPUs which were present and are no longer present.
This appears to be a misunderstanding of CPU hotplug...

So, cpufreq_remove_dev() will only get called when you call
subsys_interface_unregister(), not when the CPU present mask changes.
I suspect that the code in cpufreq_remove_dev() dealing with "offline"
CPUs even works... I'd recommend reading Documentation/cpu-hotplug.txt:

| cpu_present_mask: Bitmap of CPUs currently present in the system. Not all
| of them may be online. When physical hotplug is processed by the relevant
| subsystem (e.g ACPI) can change and new bit either be added or removed
| from the map depending on the event is hot-add/hot-remove. There are
| currently no locking rules as of now. Typical usage is to init topology
| during boot, at which time hotplug is disabled.
|
| You really dont need to manipulate any of the system cpu maps. They should
| be read-only for most use. When setting up per-cpu resources almost always
| use cpu_possible_mask/for_each_possible_cpu() to iterate.

In other words, I think your usage of cpu_present_mask in this code is
buggy in itself.

Please rethink the design of this code - I think your original change is
mis-designed.

--
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.


\
 
 \ /
  Last update: 2015-07-20 13:01    [W:0.123 / U:1.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site