lkml.org 
[lkml]   [2015]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/2] dmaengine: ti-dma-crossbar: Support for eDMA
On Wed, Jul 01, 2015 at 03:41:26PM +0300, Peter Ujfalusi wrote:
> Hi,
>
> On 06/08/2015 04:22 PM, Peter Ujfalusi wrote:
> > Hi,
> >
> > Changes since v01:
> > - Drop change in compatible for the crossbar driver and do the configuration
> > based on the DT structure.
> >
> > The ti-dma-crossbar driver in it's current form can work when it is used with
> > sDMA (omap-dma). On DRA7x class of devices we have both sDMA and eDMA available.
> > The sDMA driver expects to get the DMA request line with offset 1. The eDMA
> > stack does not need the offset.
> > The crosbbar itself is identical for sDMA and eDMA.
> > At probe time the driver will do a match to figure out which dma engine it is
> > connected to and based on that information it will configure the offset needed
> > by the DMA driver.
>
> Gentle ping, it has been almost a month ago this series has been sent.
Sorry I seem to have missed this series. I relooked at this and it looks
fine. I will apply it once rc1 is out. If it needs rebase please resend

--
~Vinod



\
 
 \ /
  Last update: 2015-07-02 18:21    [W:0.085 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site