lkml.org 
[lkml]   [2015]   [Jul]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 10/20] ARM: DTS: am437x-gp-evm: Rename fixed regulator vmmcsd_fixed to evm_v3_3d
Date
The same regulator is used by other chips on the board. The power path is:
VBAT -> TPS63031 - Enable signal is V1_8D regulator -> V3_3D.
V3_3D is used by SD slot and tlv320aic3106 codec as well.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/am437x-gp-evm.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
index e2fb2713333d..e0ce7ce0a201 100644
--- a/arch/arm/boot/dts/am437x-gp-evm.dts
+++ b/arch/arm/boot/dts/am437x-gp-evm.dts
@@ -24,9 +24,9 @@
serial3 = &uart3;
};

- vmmcsd_fixed: fixedregulator-sd {
+ evm_v3_3d: fixedregulator-v3_3d {
compatible = "regulator-fixed";
- regulator-name = "vmmcsd_fixed";
+ regulator-name = "evm_v3_3d";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
@@ -567,7 +567,7 @@

&mmc1 {
status = "okay";
- vmmc-supply = <&vmmcsd_fixed>;
+ vmmc-supply = <&evm_v3_3d>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
--
2.4.5


\
 
 \ /
  Last update: 2015-07-02 16:41    [W:0.092 / U:0.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site