lkml.org 
[lkml]   [2015]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.1 48/65] spi: orion: Fix maximum baud rates for Armada 370/XP
Date
4.1-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gregory CLEMENT <gregory.clement@free-electrons.com>

commit ce2f6ea1cbd41d78224f703af980a6ceeb0eb56a upstream.

The commit df59fa7f4bca "spi: orion: support armada extended baud
rates" was too optimistic for the maximum baud rate that the Armada
SoCs can support. According to the hardware datasheet the maximum
frequency supported by the Armada 370 SoC is tclk/4. But for the
Armada XP, Armada 38x and Armada 39x SoCs the limitation is 50MHz and
for the Armada 375 it is tclk/15.

Currently the armada-370-spi compatible is only used by the Armada 370
and the Armada XP device tree. On Armada 370, tclk cannot be higher
than 200MHz. In order to be able to handle both SoCs, we can take the
minimum of 50MHz and tclk/4.

A proper solution is adding a compatible string for each SoC, but it
can't be done as a fix for compatibility reason (we can't modify
device tree that have been already released) and it will be part of a
separate patch.

Fixes: df59fa7f4bca (spi: orion: support armada extended baud rates)
Reported-by: Kostya Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/spi/spi-orion.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)

--- a/drivers/spi/spi-orion.c
+++ b/drivers/spi/spi-orion.c
@@ -61,6 +61,12 @@ enum orion_spi_type {

struct orion_spi_dev {
enum orion_spi_type typ;
+ /*
+ * min_divisor and max_hz should be exclusive, the only we can
+ * have both is for managing the armada-370-spi case with old
+ * device tree
+ */
+ unsigned long max_hz;
unsigned int min_divisor;
unsigned int max_divisor;
u32 prescale_mask;
@@ -387,8 +393,9 @@ static const struct orion_spi_dev orion_

static const struct orion_spi_dev armada_spi_dev_data = {
.typ = ARMADA_SPI,
- .min_divisor = 1,
+ .min_divisor = 4,
.max_divisor = 1920,
+ .max_hz = 50000000,
.prescale_mask = ARMADA_SPI_CLK_PRESCALE_MASK,
};

@@ -454,7 +461,21 @@ static int orion_spi_probe(struct platfo
goto out;

tclk_hz = clk_get_rate(spi->clk);
- master->max_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->min_divisor);
+
+ /*
+ * With old device tree, armada-370-spi could be used with
+ * Armada XP, however for this SoC the maximum frequency is
+ * 50MHz instead of tclk/4. On Armada 370, tclk cannot be
+ * higher than 200MHz. So, in order to be able to handle both
+ * SoCs, we can take the minimum of 50MHz and tclk/4.
+ */
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "marvell,armada-370-spi"))
+ master->max_speed_hz = min(devdata->max_hz,
+ DIV_ROUND_UP(tclk_hz, devdata->min_divisor));
+ else
+ master->max_speed_hz =
+ DIV_ROUND_UP(tclk_hz, devdata->min_divisor);
master->min_speed_hz = DIV_ROUND_UP(tclk_hz, devdata->max_divisor);

r = platform_get_resource(pdev, IORESOURCE_MEM, 0);



\
 
 \ /
  Last update: 2015-07-19 22:01    [W:0.242 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site