lkml.org 
[lkml]   [2015]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] can: mcp251x: fix resume when device is down
Hi Marc, hi Wolfgang,

Any comment on this two patches? I don't think these have made it in any
tree...

--
Stefan

On 2015-05-18 18:33, Stefan Agner wrote:
> If a valid power regulator or a dummy regulator is used (which
> happens to be the case when no regulator is specified), restart_work
> is queued no matter whether the device was running or not at suspend
> time. Since work queues get initialized in the ndo_open callback,
> resuming leads to a NULL pointer exception.
>
> Reverse exactly the steps executed at suspend time:
> - Enable the power regulator in any case
> - Enable the transceiver regulator if the device was running, even in
> case we have a power regulator
> - Queue restart_work only in case the device was running
>
> Fixes: bf66f3736a94 ("can: mcp251x: Move to threaded interrupts
> instead of workqueues.")
> Signed-off-by: Stefan Agner <stefan@agner.ch>
> ---
> drivers/net/can/spi/mcp251x.c | 13 ++++++-------
> 1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/net/can/spi/mcp251x.c b/drivers/net/can/spi/mcp251x.c
> index bf63fee..34c625e 100644
> --- a/drivers/net/can/spi/mcp251x.c
> +++ b/drivers/net/can/spi/mcp251x.c
> @@ -1221,17 +1221,16 @@ static int __maybe_unused
> mcp251x_can_resume(struct device *dev)
> struct spi_device *spi = to_spi_device(dev);
> struct mcp251x_priv *priv = spi_get_drvdata(spi);
>
> - if (priv->after_suspend & AFTER_SUSPEND_POWER) {
> + if (priv->after_suspend & AFTER_SUSPEND_POWER)
> mcp251x_power_enable(priv->power, 1);
> +
> + if (priv->after_suspend & AFTER_SUSPEND_UP) {
> + mcp251x_power_enable(priv->transceiver, 1);
> queue_work(priv->wq, &priv->restart_work);
> } else {
> - if (priv->after_suspend & AFTER_SUSPEND_UP) {
> - mcp251x_power_enable(priv->transceiver, 1);
> - queue_work(priv->wq, &priv->restart_work);
> - } else {
> - priv->after_suspend = 0;
> - }
> + priv->after_suspend = 0;
> }
> +
> priv->force_quit = 0;
> enable_irq(spi->irq);
> return 0;



\
 
 \ /
  Last update: 2015-07-15 15:21    [W:0.070 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site