lkml.org 
[lkml]   [2015]   [Jul]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RESEND PATCH 2/2] pinctrl: introduce complex pin description
On Tue, Jul 14, 2015 at 08:13:59AM +0200, Sascha Hauer wrote:
> On Wed, Jun 10, 2015 at 05:04:57PM +0200, Ludovic Desroches wrote:
> > Using a string to describe a pin in the device tree can be not enough.
> > Some controllers may need extra information to fully describe a pin. It
> > concerns mainly controllers which have a per pin muxing approach which
> > don't fit well the notions of groups and functions.
> > Instead of using a pin name, a 32 bit value is used. The 16 least
> > significant bits are used for the pin number. Other 16 bits can be used to
> > store extra parameters.
>
> In the Mediatek driver we use 'pinmux' as name for the property
> containing the combined pin number / mux value defines. 'pinmux' better
> describes what it is...
>

At the moment, I don't mix pin number and pin mux. I mix pin number and
ioset. It allows to check that all the pins belong to the same ioset.

As said previously, I didn't want to mix pin mux and pin conf in the
same node (but it is something I can do, it's not a problem on my side).
If I do it I will have to mux three values: pin number, pin mux value
and pin ioset.

So assuming I do this change, your advice is to add a 'pinmux' property in
addition of 'pins' instead of trying to use it?

> > +
> > + if (pctldesc->complex_pin_desc)
> > + ret = of_property_count_u32_elems(np, "pins");
> > + else
> > + ret = of_property_count_strings(np, "pins");
>
> ... and has the advantage that you don't have to pass in a
> complex_pin_desc variable from the driver as the different property
> name inherently carries this information. 'pins' can then stay a
> property containing only strings.
>
> > if (ret < 0) {
> > ret = of_property_count_strings(np, "groups");
> > if (ret < 0)
> > @@ -297,11 +305,12 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
> > if (type == PIN_MAP_TYPE_INVALID)
> > type = PIN_MAP_TYPE_CONFIGS_GROUP;
> > subnode_target_type = "groups";
> > + pins_prop = false;
> > } else {
> > if (type == PIN_MAP_TYPE_INVALID)
> > type = PIN_MAP_TYPE_CONFIGS_PIN;
> > }
> > - strings_count = ret;
> > + items_count = ret;
> >
> > ret = of_property_read_string(np, "function", &function);
> > if (ret < 0) {
> > @@ -326,17 +335,31 @@ int pinconf_generic_dt_subnode_to_map(struct pinctrl_dev *pctldev,
> > if (num_configs)
> > reserve++;
> >
> > - reserve *= strings_count;
> > + reserve *= items_count;
> >
> > ret = pinctrl_utils_reserve_map(pctldev, map, reserved_maps,
> > num_maps, reserve);
> > if (ret < 0)
> > goto exit;
> >
> > - of_property_for_each_string(np, subnode_target_type, prop, group) {
> > + items_name = kmalloc_array(items_count, sizeof(char *), GFP_KERNEL);
> > + if (!items_name)
> > + goto exit;
> > + if (pctldesc->complex_pin_desc && pins_prop) {
> > + of_property_for_each_u32(np, subnode_target_type, prop, cur, val) {
> > + pin_id = val & PINCTRL_PIN_MASK;
> > + items_name[i++] = pctldesc->pins[pin_id].name;
> > + }
>
> I don't like that even though pins have numbers here they are converted
> to strings which the driver later has to search in a list just to
> convert it back into the number. This is quite inefficient.
>
> I guess this could be optimized later, but it would be nice to have the
> pin number directly in the driver.

I know that is something you don't like but, at the moment, I need a string for
pinctrl_utils_add_map_mux and pinctrl_utils_add_map_configs.


Ludovic


\
 
 \ /
  Last update: 2015-07-15 11:01    [W:0.165 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site