lkml.org 
[lkml]   [2015]   [Jul]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [rtc-linux] [PATCH v4 3/7] rtc: mxc: use a second rtc clock
On 04/07/2015 at 01:15:16 +0200, Philippe Reynes wrote :
> The mxc RTC needs two clocks, one for the input
> reference, and one for the IP. But this driver
> was only using one clock (for the reference).
> This patch add the second clock (for the IP).
>
> Signed-off-by: Philippe Reynes <tremyfr@gmail.com>

Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

I don't really care how the clocks are named, feel free to rename them
and keep that ack.

> ---
> drivers/rtc/rtc-mxc.c | 41 ++++++++++++++++++++++++++++-------------
> 1 files changed, 28 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
> index 5fc292c..4ce7e21 100644
> --- a/drivers/rtc/rtc-mxc.c
> +++ b/drivers/rtc/rtc-mxc.c
> @@ -79,7 +79,8 @@ struct rtc_plat_data {
> struct rtc_device *rtc;
> void __iomem *ioaddr;
> int irq;
> - struct clk *clk;
> + struct clk *clk_rtc;
> + struct clk *clk_ipg;
> struct rtc_time g_rtc_alarm;
> enum imx_rtc_type devtype;
> };
> @@ -373,17 +374,28 @@ static int mxc_rtc_probe(struct platform_device *pdev)
> if (IS_ERR(pdata->ioaddr))
> return PTR_ERR(pdata->ioaddr);
>
> - pdata->clk = devm_clk_get(&pdev->dev, NULL);
> - if (IS_ERR(pdata->clk)) {
> - dev_err(&pdev->dev, "unable to get clock!\n");
> - return PTR_ERR(pdata->clk);
> + pdata->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
> + if (IS_ERR(pdata->clk_ipg)) {
> + dev_err(&pdev->dev, "unable to get ipg clock!\n");
> + return PTR_ERR(pdata->clk_ipg);
> }
>
> - ret = clk_prepare_enable(pdata->clk);
> + ret = clk_prepare_enable(pdata->clk_ipg);
> if (ret)
> return ret;
>
> - rate = clk_get_rate(pdata->clk);
> + pdata->clk_rtc = devm_clk_get(&pdev->dev, "rtc");
> + if (IS_ERR(pdata->clk_rtc)) {
> + dev_err(&pdev->dev, "unable to get rtc clock!\n");
> + ret = PTR_ERR(pdata->clk_rtc);
> + goto exit_put_clk_ipg;
> + }
> +
> + ret = clk_prepare_enable(pdata->clk_rtc);
> + if (ret)
> + goto exit_put_clk_ipg;
> +
> + rate = clk_get_rate(pdata->clk_rtc);
>
> if (rate == 32768)
> reg = RTC_INPUT_CLK_32768HZ;
> @@ -394,7 +406,7 @@ static int mxc_rtc_probe(struct platform_device *pdev)
> else {
> dev_err(&pdev->dev, "rtc clock is not valid (%lu)\n", rate);
> ret = -EINVAL;
> - goto exit_put_clk;
> + goto exit_put_clk_rtc;
> }
>
> reg |= RTC_ENABLE_BIT;
> @@ -402,7 +414,7 @@ static int mxc_rtc_probe(struct platform_device *pdev)
> if (((readw(pdata->ioaddr + RTC_RTCCTL)) & RTC_ENABLE_BIT) == 0) {
> dev_err(&pdev->dev, "hardware module can't be enabled!\n");
> ret = -EIO;
> - goto exit_put_clk;
> + goto exit_put_clk_rtc;
> }
>
> platform_set_drvdata(pdev, pdata);
> @@ -424,15 +436,17 @@ static int mxc_rtc_probe(struct platform_device *pdev)
> THIS_MODULE);
> if (IS_ERR(rtc)) {
> ret = PTR_ERR(rtc);
> - goto exit_put_clk;
> + goto exit_put_clk_rtc;
> }
>
> pdata->rtc = rtc;
>
> return 0;
>
> -exit_put_clk:
> - clk_disable_unprepare(pdata->clk);
> +exit_put_clk_rtc:
> + clk_disable_unprepare(pdata->clk_rtc);
> +exit_put_clk_ipg:
> + clk_disable_unprepare(pdata->clk_ipg);
>
> return ret;
> }
> @@ -441,7 +455,8 @@ static int mxc_rtc_remove(struct platform_device *pdev)
> {
> struct rtc_plat_data *pdata = platform_get_drvdata(pdev);
>
> - clk_disable_unprepare(pdata->clk);
> + clk_disable_unprepare(pdata->clk_rtc);
> + clk_disable_unprepare(pdata->clk_ipg);
>
> return 0;
> }
> --
> 1.7.4.4
>
> --
> --
> You received this message because you are subscribed to "rtc-linux".
> Membership options at http://groups.google.com/group/rtc-linux .
> Please read http://groups.google.com/group/rtc-linux/web/checklist
> before submitting a driver.
> ---
> You received this message because you are subscribed to the Google Groups "rtc-linux" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
> For more options, visit https://groups.google.com/d/optout.

--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com


\
 
 \ /
  Last update: 2015-07-15 00:01    [W:0.105 / U:0.536 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site